User manual

Important
External monitor must be connected to the
I/O board. When connected to the capture
board, the external monitor will always fol-
low the Live mode main screen.
To Set up an External Monitor, do the following
1. Select the video source input number to be shown in the sequence. This refers to the physical BNC connectors at the
back of the DVR. (i.e. the Video Source in the Channel Settings setup). In this example, cameras 4, 9-12 will be shown
in sequence on the external monitor.
2.
Specify the Dwell(Sec) time for the sequence. Dwell(Sec) refers to the interval (in seconds) between the display
of each video input. In this example, each video input will be shown on the external monitor for 3 seconds.
3.
Click the Save button to save the configured settings
OR
1.
Check Ext Monitor Follow Main Screen to associate the external monitor with the ELMO-PRO Server
Main Screen
2.
Click the Save button to save the configured settings
If Ext Monitor Follow Main Screen is unchecked, the external monitor will display selected video source
input one-by-one in sequence. Each video source input will be displayed for Dwell time configured in the External Monitor
setup. In this example, cameras 4, 9-12 will be shown in sequence on the external monitor. Each video input will be
shown for 3 seconds.
If Ext Monitor Follow Main Screen is checked, the configured video source input sequence will be ignored.
The External monitor will display the video source input currently in full screen mode on the ELMO-PRO Server - chosen
by the user or in response to the detected motion. The external monitor will display the last video source input until the
next video input is displayed in the Full Screen mode on the ELMO-PRO Server.
Related Topics: Hardware Setup-Channel Settings
1.3.5. Motion Setup
1.3.5.1. Overview
Motion Setup allows for the configuration of motion detection zones for each channel. Each target zone can have its own
motion detection configuration.
33ELMO-PRO v.1.403.16 - User Manual
Motion SetupChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/