User manual

To rename created pattern, do the following:

Select the desired pattern in the Patterns drop-down menu

Right-click inside the Patterns field

Select Rename Pattern from the context menu

Type the custom preset name in the Patterns field

To delete created pattern, do the following:

Select the pattern in the Patterns drop-down menu

Right-click inside the Patterns field

Select Delete Pattern from the context menu

1.2.6.6. AUX Control Mode

ELMO-PRO supports AUX (Auxiliary) mode for the certain PTZ cameras. This function allows changing certain supported

camera settings remotely through the software, as opposed to adjusting settings manually on the mounted camera.

To access the AUX Control mode, do the following:

1. Locate the channel number in the middle of the PTZ Control Wheel

2. Right-click the channel number. The context menu will be displayed.

Note

The context menu will vary based on the

PTZ model.

Select Aux Control from the context menu. Ptz-Aux Control window will be displayed.

The Ptz-Aux Control window displays the list of available auxiliary commands along with the command description.

Choose the desired command in the Command drop-down menu and click Execute to apply.

The following auxiliary commands may be available:

1. Brightness

2. Change ID

3. Color Mode

26ELMO-PRO v.1.403.16 - User Manual

PTZ modeChapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/