User manual

3.
Click Close. The touring will stop.
To delete a preset tour, do the following:
1.
In the Preset Touring Manager window, select the Tour from the Tours drop-down menu.
2.
Click Delete to delete the unwanted Preset Tour from the list.
1.2.6.5. Programming Pattern(s)
Pattern is a custom path of the speed dome from start point to end point and back. This is different from the preset
touring, where camera switches between the maximum of 10 configured presets. Pattern records every movement of
the speed dome, therefore, the user must be precise, when creating a new pattern to avoid unwanted speed dome
movements.
To create speed dome pattern, do the following:
1. Enter PTZ mode by double-clicking the PTZ channel on the main screen
2. Make sure that the software is in either Advanced or Tree view. To check, click View menu
3.
Click the Advanced Control panel in the Control Center to expand it
4. Configure the pattern start point same as preset via PTZ Advanced Control panel and/or in-cameo mouse function.
(See Programming Presets for more information)
5.
Right-click inside the Patterns field
6.
Select Create Pattern -> Set Pattern Start from the context menu. The pattern start point has been
saved.
7. Create a custom speed dome path that covers all desired locations. Remember that Pattern function is recording
every move from the time Set Pattern Start has been clicked.
8.
When finished, right-click inside the Patterns field
9.
Select Create Pattern -> Set Pattern End to complete the Pattern recording
10. The following message will be displayed:
11.
To save created pattern, click Yes
A default name is used for all new patterns. The pattern(s) can be optionally renamed by the user.
25ELMO-PRO v.1.403.16 - User Manual
PTZ modeChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/