User manual

1.
Select the preset in the Presets drop-down menu
2.
Right-click inside the Presets field
3.
Select Delete from the context menu. In the example below, Preset 10 will be deleted.
1.2.6.4. Programming Preset Tour(s)
Preset Tour is a sequence of selected presets that is displayed continuously until interrupted by user. The Dwell Time
determines the delay time between two consecutive presets.
To create a preset tour, do the following:
1. Program all desired presets in the PTZ mode. (See Managing PTZ Presets for more information)
2.
Click the Preset Touring button . The Preset Touring Manager window will be displayed
3.
Click New to create a new tour
4. Select the desired presets in the Tour Configuration area by checking off the corresponding check boxes
5.
Enter the Dwell Time (Sec) value to determine the delay time between two consecutive presets. In the example
above, the Preset Tour 1 will cause the PTZ camera to switch between Preset 1 and Preset 2 every 5 seconds.
6.
Click Save to save configured preset tour
7.
To create additional Preset Tours, repeat steps 3-6
To stop touring, do the following:
1.
Click the Preset Touring button . The Preset Touring Manager window will be displayed
2.
In the Tours drop-down menu select the empty position
24ELMO-PRO v.1.403.16 - User Manual
PTZ modeChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/