User manual

Emap Viewer: This feature is only active in the Live Mode (Mux display) and is only enabled when the Emap is
configured in the Server setup. See E-Map section for more information. Select Emap Viewer option from the list
to display the Emap Viewer window with all configured e-maps.
Setup Mode: Select to access the ELMO-PRO setup mode.
Search Mode: Select to access the ELMO-PRO search mode.
Backup: Select to access the Backup window. See Backup on ELMO-PRO section for more information.
Scheduled Backup: Select to access the Scheduled Backup window. See Scheduled Backup section for more
information.
Virtual Keyboard: Select to display the virtual keyboard. The Virtual Keyboard can be used to enter information.
Use the mouse cursor to input the alphanumeric characters.
1.2.4.4. Help Menu
Help menu allows accessing the ELMO-PRO user guide, license agreement and ELMO-PRO version.
Help Index: Click to display the help menu window.
About: Click to display the ELMO license agreement and the software version. Click I Accept to close.
1.2.5. Real-time Display vs Mux Display
ELMO-PRO offers two different Live mode displays: Real-time and Mux (Multiplexer) display.
Real-time display allows viewing analog cameras only. This mode takes raw video directly from the capture card,
therefore IP cameras cannot be viewed in Real-time mode. All connected analog video inputs are assigned to the default
screen division, the main screen division display cannot be changed in real-time mode. Real-time display does not support
text overlay feature or any custom indicators such as PAN/TILT, Intelli-Zone, etc. Additionally, the real-time mode displayed
all channels at the 30 frames-per-second rate. Real-time mode is best to be used for monitoring and surveillance. Real-
time display mode does not reflect the quality of the video recording. I.e. If the Camera 1 is set to 7 fps recording rate,
it will still be displayed at 30 fps rate in the Real-time display in Live mode.
Mux (Multiplexer) display allows viewing both analog and IP cameras. Text overlay feature and drag-and-drop
features are supported. Each video input can be assigned to one or more channels. Video channels can be organized based
on customer preference on the main screen display. Mux mode displays the video recording at the same speed as it is
recorded (See Recording/Display section for more information). I.e. If the Camera 1 is set to 7 fps recording rate, it will
be displayed at 7 fps rate in the Mux display in Live mode.
14ELMO-PRO v.1.403.16 - User Manual
Real-time Display vs Mux DisplayChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/