User manual

2.6. ELMO-PRO Server Setup (via Re-
mote)
The connected user can change most setup settings according to their level of access on the active remote Server. Only
allowed setup tabs and features will be accessible based on user account. Certain setup features are only accessable
locally and are NOT available on ELMO-PRO Remote, such as editing/deleting user accounts or changing port settings.
Warning
The ELMO-PRO Remote version MUST
match the ELMO-PRO Server version.
To access the setup mode of the specific remote Server, do the following:
1. Connect to the remote Server and ensure it is active. (See Activating Connected Servers for more information)
2.
Click the Setup button
2.6.1. Remote Info Setup
The only setup tab present on ELMO-PRO Remote that is not available on ELMO-PRO Server is Remote Info setup
tab.
The Server Info Setup permits changing the ELMO-PRO Remote language, as well as obtaining information about the
local computer, on which the ELMO-PRO Remote is installed.
System Information:
143ELMO-PRO v.1.403.16 - User Manual
ELMO-PRO Server Setup (via Remote)Chapter 2. ELMO-PRO Remote
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/