User manual

2.5. Managing Sites
2.5.1. Connecting to a Remote Site
To connect to the remote site, do the following:
1. Select the desired remote site in the Servers list (ELMO-PRO Control Center)
2.
Click on the Connect to Server button or double-click on the selected server to connect. The Connection
window will be displayed.
3.
If the connection is successful, the server icon will change from to or
4. Repeat steps 1-2 for all desired remote sites.
2.5.2. Activating Connected Servers
Only one connected remote server is active at each given time.
Important
To search or configure setup for the specific
server it MUST be active
To switch between connected remote servers, do the following:
1. Select the desired inactive remote site in the Servers list.
2.
Right-click and select Active from the context menu. The server icon will change from to .
3. To deactivate server, select the desired active remote site in the Servers list.
4.
Right-click and select Inactive from the context menu. The next connection on the list will become active
In the example above, ELMO-PRO Remote is connected to Servers 1, 2 and 4, whil Server 3 is offline. Server 4 is the
active server.
2.5.3. Disconnecting from a Remote Site
To disconnect from the remote site, do the following:
1. Select the remote site in the Servers list.
2.
Click on the Disconnect Server button .
3.
The server icon will change from to or
142ELMO-PRO v.1.403.16 - User Manual
Managing SitesChapter 2. ELMO-PRO Remote
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/