User manual

2.2. Creating a New Connection
To create a new Server connection, do the following:
1.
In the ELMO-PRO Control Center, click the Add/Edit Server icon . A new window will be displayed
2.
Fill out the Add a new site window.
3.
Enter Server ID – This must match the remote Server ID as entered in the Server Information Setup.
Caution
Ensure that the ELMO-PRO Server version
installed on the remote DVR matches the
ELMO-PRO Remote version.
4.
Enter a Server Name – a descriptive name for the server. E.g. “main office”
5.
Enter the Server IP address.
6.
Enter the Main Control Port number. It must match with the number in Main Control Port in the Commu-
nication setup tab in the server
7.
Enter the User name and Password. When trying to connect to the remote server, the system will check
the Server ID, User name and Password together. If either of the variables is incorrect, the Remote software will not
be able to connect to the site
8.
Click Add to save the new connection or click Close to close the new site setup window without saving.
9. When information for the new site is completed, it will appear in the Servers list.
138ELMO-PRO v.1.403.16 - User Manual
Creating a New ConnectionChapter 2. ELMO-PRO Remote
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/