User manual

Important
This feature is not supported with IP camer-
as.
1.3.21.2. Configuring Virtual Ruler
To configure Virtual Ruler setup, do the following:
1.
Click the Browse button in the Channel # field to select the desired channel from the list. Only channels
activated in the Hardware Setup tab will be displayed.
2.
Check Show Text Overlay/Virtual Ruler in Mux Display on the Server to see the Virtual
Ruler in the live view window.
3.
Select the Color (Black or White) of the ruler that will be shown on the screen. Choose the color that will best
contrast with the background.
4.
In the Degree frame, enter the Start Point value of the ruler. This number will be shown at the starting point
of the ruler.
5.
In the Degree frame, enter the End Point value of the ruler. This number will be shown at the end point of
the ruler.
6.
In the Degree frame, enter the Length of Division value, which is the value of one ruler division. This
number has to be smaller than the length of the ruler, or will be assigned the same value as the length of the ruler.
The division value is the distance (in chosen units: feet, meters, etc.) between two dividers. To obtain the total
number of ruler divisions, the length of the ruler is divided by the Length of Division value.
98ELMO-PRO v.1.403.16 - User Manual
Virtual RulerChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/