User manual

To set up Recording/Display, do the following:
1.
Configure the Record Frame, frames per second (FPS) rate for each analog camera. Note that these settings
apply on per camera and not per channel basis. The configured recording fps rate will also affect the Mux display.
2.
Configure the Resolution for each camera. Three resolution options are available: 360x240, 720x240, and
720x480. The higher the resolution, the higher the quality of the video recording and the more hard drive space is
required for storage. Also note that with the higher resolution options, the total number of FPS will drop.
3.
Click Defaults to assign an average fps number of each camera
4.
Click the Save button to save the configured settings
Note
This setup tab affects recording frame rate
and display frame rate for Mux display (Live
Mode display).
1.3.21. Virtual Ruler
1.3.21.1. Overview
With this feature it is possible to approximate the height of a person once they are in the camera's view. During playback,
the person's height can be estimated with regard to the virtual ruler. (In the example below, the ruler is 6' long with a
division value of 1'.)
97ELMO-PRO v.1.403.16 - User Manual
Virtual RulerChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/