User manual

1.3.19.4. VideoLogix on the Main Screen
The Main Screen displays all configured VideoLogix™ detection zones along with the assigned names. Once the alarm is
triggered in one of the specified zones, the word "Alarm" is displayed on the screen.
1.3.20. Recording/Display
1.3.20.1. Overview
Recording/Display allows the user to adjust the frame rate value individually for each camera. The user may choose to
increase the fps number for the cameras facing the most important location or locations where the most activity occurs.
Increasing the fps on specific cameras will decrease the fps number on the rest of the cameras, if total fps selected is
over the maximum allowed. The ELMO-PRO Server supports up to a total of 240 frames per second (SPK key dependent).
With no SPK key, the maximum total frame rate supported is 60 fps. Note that the total frame rate is divided between
both analog and IP cameras.
To assign the average recording/display frame rate value to each camera, click this button:
Important
This feature is not supported with IP camer-
as. Frame rate for IP cameras is configured
in the IP Camera setup tab.
96ELMO-PRO v.1.403.16 - User Manual
Recording/DisplayChapter 1. ELMO-PRO Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/