Instruction Manual

5
■ Wireless LAN (WiFi) radio wave
・ This product uses 2.4GHz radio waves. This product and the wireless device in this
product have been certified under the Radio Law. Using this product in countries other
than the country where you purchased it may infringe the radio wave laws of the
country where it is used.
・ In case of communication problem change location. Depending on the using
environment (e.g., there are many obstacles) the wireless communication may be
adversely affected. Especially the wireless communication is not available under the
following conditions.
‒ There are metal and/or concrete between the product and monitor.
・ Do not use this product under the following conditions.
‒ Near industrial, scientific, and medical devices, such as a pacemaker
‒ Near in-plant radio station for mobile equipment identifier (license required and being
used in factory line; etc.)
‒ Near low power wireless base station (license not required)
・ Electromagnetic interference caused by using Bluetooth devices
Bluetooth devices and this product use the same band of frequency (2.4GHz). So using
these devices in the same area may cause electromagnetic interference and it may cause
lower communication speed or connection failure.
Turn off the device which is not currently using if the communication problem occurs.
・ There are conditions to be met before using 5GHz wireless LAN outdoor.
■ This product shares a frequency band with a wide range of equipment (e.g. industrial,
scientific, and medical equipment such as microwave ovens), in-plant radio station for
mobile equipment identifier (radio stations requiring licenses), and specified low-power
radio stations (radio stations not requiring licenses) used for factory production lines as
well as amateur radio stations (radio stations requiring licenses).
・ Before use, confirm that no in-plant radio station for mobile equipment identifier and
specified low-power radio stations or amateur radio stations operate in your vicinity.
・ In the event that this equipment causes harmful interference to any in-plant radio
station for mobile equipment identifier, immediately change frequencies or halt radio
wave emission and contact the dealer from whom you purchased the product for
consultation on interference avoidance measures (e.g., partition installation).
・ Please contact the dealer from whom you purchased the product if this equipment
causes harmful interference to any specified low-power radio stations or amateur radio
stations, or if other problems arise.
■ Connectivity with all wireless LAN (WiFi) compatible devices is not guaranteed.
Bluetooth and wireless LAN (WiFi) use the same band of frequency. So using them in the
same area may cause electromagnetic interference and it may cause lower
communication speed or connection failure.
Turn off either Bluetooth or wireless LAN (WiFi) if the communication problem occurs.
■ Changing SSID and Key
・ We recommend to change the default SSID and Key in order to prevent unauthorized
use by third parties. The changed SSID and Key can be reset to the factory setting.
■ The contents of this document are subject to change without notice. The latest version is
available from the following official website:
https://www.elmousa.com https://www.elmoeurope.com
■ It is prohibited under copyright law to use or copy any part or the whole of this document
without our prior written consent.
■ ELMO shall not be liable for any claim for damage or loss of earnings or any claim raised
by a third person due to the use, malfunction or repair of this product.