Instruction Manual

47
■Miracast input
The screen of the Miracast supporting device can be displayed on the screen of the
product. (Mirroring)
①Display the Application launcher screen and select Miracast [ ].
②Select “Allow other device to find the product”.
③Select the product from the menu of the connected Miracast device after the
Connection device search screen is displayed.
④The image of the connected Miracast device will be displayed on the screen of the
product once the connection is successfully established.
To finish Mirroring, press the External input button of the product.
◆TIMER
Open the Application launcher screen and select “Timer”.（⇒P.23）
You can set the timer at the desired time.
The alarm will sound at the set time.
※The maximum time that can be set is 99 minutes.
※The gauge will decrease over time.
＜How to set the timer＞
1. Tap the Time select icon (when using MA-1) or click the Time select icon with the
mouse (when using MO-2) to set the time.
2. Press the Operation button (Play). The timer will start counting down and the gauge
will decrease.
3. When the set time is elapsed, the timer will sound.
＜How to stop the timer＞
1. Press the Operation button (Pause) to pause the timer.
2. Press the Operation button (Play) again to restart.
Icon
Name
Function
Reset
The timer will be reset to [00:00].
Time select
To set the time to sound the alarm.
Adjust the time by selecting the icon.
Time will increase each time the icon is tapped.
（+10sec/+1min/+10min）
Home
To return to the Application launcher screen.
Document
camera
To display the camera image.
Gauge
Remaining time
Operation button (Play/Pause)