Instruction Manual

44
Status LED
◆CONNECTING TO NETWORK
This product can be connected to the network via WiFi or Ethernet. When the WiFi
setting is set at power-on, the product will connect to the network automatically.
※WiFi and Ethernet cannot be used at the same time.
→Ethernet has a priority over WiFi.
(When the product is connected to Ethernet while it is connected to WiFi, the WiFi
connection will be disconnected automatically.
For MO-2 only
The connection status will be indicated by the Status LED during WiFi connection.
■How to connect to WiFi
Select WiFi[ ] from the System settings in the Settings menu [ ].
A list of network will be displayed. Select the SSID and password.
Enter the password using the keyboard.
Press [Connect] to connect to WiFi
◆ABOUT BATTERY
The battery of the product will be charged by using the AC adapter.
You can use the product while charging the battery.
When power is on：The remaining battery level will be displayed in the Status area.
The Charging icon will be displayed during charging.
When power is off：The status will be indicated by LED. (Fully charged / Charging)
Status
LED
WiFi connected
Blue
WiFi connecting
Flash blue
WiFi not connected
Off
Remaining
battery
Icon
Charging
90％ or more
70％ or more
50％ or more
30％ or more
0％ ore more