Instruction Manual

21
◆TURNING ON OR OFF THE LED LIGHTING
MA-1
Tap the LED lighting icon [ ] in the Menu area to turn on the LED lighting.
(ON: )
Tapping the icon again will turn off the LED lighting.
MO-2
Press the LED lighting button [ ] to turn on the LED lighting.
Pressing the button again will turn off the LED lighting.
◆CAPTURING STILL PICTURES
The camera image can be captured at the set resolution. (Captured still pictures will be
saved as JPEG file in the recording media.)
※The annotation on the image can also be saved.
※The image capture can be performed on any image displayed.
MA-1
Press the Capture button [ ] on the operating panel or tap the Capture icon [ ]
in the Menu area on the touchscreen to capture the camera image.
※To temporarily change the destination for captured still pictures, long press the
button or icon. The sub menu will be displayed and you can change the destination.
The image capture will be performed once the destination is changed.
MO-2
Press the Capture button [ ] on the operating panel to capture the camera image.
※To temporarily change the destination for captured still pictures, long press the
button. The sub menu will be displayed and you can change the destination.
The image capture will be performed once the destination is changed.
Captured still pictures can be saved in the following destination: Google Drive / SD card
/ USB flash drive / internal storage
(Active devices will be displayed as destination.)
CAUTION
• To take shots of people, turn off the LED lighting.
• Make sure that the light from the LED lighting does not shine directly into your eyes.
• This product is equipped with a high-brightness LED. You can safely use it to light
up the subject. The brightness will gradually decrease with long-term use. This is
not a malfunction but a characteristic of the LED.
• Do not touch the LED lighting while it is on as it may become very hot.