Instruction Manual

18
➍ USING THE PRODUCT
◆TURNING ON OR OFF THE POWER
Connect the AC adapter to the product. Connect the AC adapter to a wall outlet.
Long press the Power button [ ] to turn on the power.
When the Power button [ ] is long pressed again while the power is on, the power will
go off.
※The color of the Power LED changes to blue from red after the power is on.
※When the Power button is short pressed while the power is on, the product will enter
the standby mode. The standby mode will be cancelled when the Power button is short
pressed again.
※The functions of the product will be off or paused in standby mode.
(LED lighting, touchscreen, HDMI, RGB, External input pass-through, audio output)
※The Destination select screen will be displayed over the camera image when the power is
turned on for the first time. Select the country where the product is being used.
※(The Destination select screen will also be displayed when the power is turned on after the
initialization is performed.)
※The product can be turned on without connecting to a wall outlet when the battery is fully
charged.
POWER LED STATUS
Model
Status
AC
adapter
Charging
status
LED
Image output
HDMI/RGB
Touchscreen
USB
Miracast
MA-1
Power
OFF
Not
connected
-
Off
×
Connected
Charging
On
Red
Fully
charged
Off
Power ON
Not
connected
-
On
Blue
○
○
○
○
Connected
Charging
On
Blue
○
○
○
○
Fully
charged
On
Blue
○
○
○
○
Standby
Not
connected
-
On
Blue
×
Connected
Charging
On
Blue
Fully
charged
On
Blue
MO-2
Power
Not
-
Off
×
MA-1
MO-2
MO-2
/