VISUAL PRESENTER MA-1 / MO-2 INSTRUCTION MANUAL
■IMPORTANT SAFEGUARDS ■ Read Instructions All the safety and operating instructions should be read before the appliance is operated. ■ Retain Instructions The safety and operating instructions should be retained for future reference. ■ Heed Warnings All warnings on the product and in the operating instructions should be adhered to. ■ Follow Instructions All operating and use instructions should be followed. ■ Cleaning Unplug this product from the wall outlet before cleaning.
■ Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. ■ A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
BEFORE YOU USE ■ Be sure to use the AC adapter. ■ The supplied AC adapter is designed for exclusive use with this product. Do not use it with other products. ■ Do not press the panel strongly by finger or sharp objects. This can cause damage or malfunction. ■ Be careful not to pinch your finger when you move the monitor. ■ A protective sheet is attached to the surface of the touchscreen. Remove it before you use the product.
■ Wireless LAN (WiFi) radio wave ■ ■ ■ ■ ■ ■ ・ This product uses 2.4GHz radio waves. This product and the wireless device in this product have been certified under the Radio Law. Using this product in countries other than the country where you purchased it may infringe the radio wave laws of the country where it is used. ・ In case of communication problem change location. Depending on the using environment (e.g., there are many obstacles) the wireless communication may be adversely affected.
HANDLING PRECAUTIONS The followings are special precautions against mishandling of the product. Pay close attention to them. ①Installation Do not place the product on an unstable place or slanted surface ②Setting up When setting up the product, hold the body around the operating panel. Be careful not to pinch your fingers 6 ③Carrying the product Carry the product by folding the arm so as not to damage the camera. Do not carry by holding the arm or camera head.
■ TABLE OF CONTENTS ■IMPORTANT SAFEGUARDS 1 BEFORE YOU USE ·································································································· 4 HANDLING PRECAUTIONS ······················································································· 6 ■ TABLE OF CONTENTS 7 ➊ PREPARATION 8 ◆PACKAGE CONTENTS·························································································· 8 ➋ BASIC OPERATIONS 9 ◆THE NAME OF EACH PART ···············································
➊ PREPARATION ◆PACKAGE CONTENTS The items below are included with the product. If any item is missing, contact the dealer from whom you purchased the product. MA-1 MO-2 MO-2 / (For Australia) AC adapter Quick Start Guide Warranty Card (For Japan/ North America only） IMPORTANT SAFEGUARDS ●About AC adapter Press and slide the plug into the groove of the AC adapter as shown in the drawing. ※Slide it until it clicks. ※Choose the correct plug according to the outlet.
➋ BASIC OPERATIONS ◆THE NAME OF EACH PART ① MA-1 ① MO-2 MO-2 / ② ② ③ ③ ⑦ ④ ⑥ ⑥ ⑤ ④ ⑤ MA-1／MO-2 ⑤ ⑥ Name ① Camera head ② LED lighting ③ Arm ④ Operating panel ⑤ Front panel ⑥ Rear panel ⑦ Touchscreen 9
◆OPERATING PANEL ■MA-1 ⑨ ⑧⑦ ⑥ ⑤ ④ ③ ② ① Name Description Long press＝To turn on or off the power. Short press＝To enter or cancel the standby mode. ① Power LED Power Power on：Turns blue Power off：Turns red（※LED off：when the AC adapter is not connected or when the battery is fully charged） To pause the currently displayed image. Press this button again to ② Freeze ③ Capture To save the currently displayed image as a still picture. ④ Home To switch to the Application launcher screen.
⑤ Camera To display the camera image. ⑥ External input To switch between the HDMI IN-image and the camera image. ⑦ Status LED To indicate the status of the external input. ( HDMI／WiFi／Miracast) ⑧ Brightness＋ To brighten the image ⑨ Brightness- To darken the image. ⑩ Home To switch to the Application launcher screen. ⑪ Capture（Up） To save the currently displayed image as a still picture.（⇒P.
Name Description ① Security slot To connect a security cable. ② LAN To connect the product to the network. USB2.0 To connect the product to a PC. (Mass storage connection) (TypeB) To playback image files or audio files stored on the SD card. ③ ④ USB2.0 (TypeA) ⑤ AUDIO OUT ⑥ RGB OUT ⑦ ⑧ To connect the mouse, the keyboard or the USB flash drive. To output audio. (The Audio cable is not included.) To output RGB images by connecting to a monitor via the RGB cable.
◆HDMI PASS-THROUGH (DISPLAYING THE EXTERNAL INPUT IMAGE) The image being input to the HDMI IN port can be output from the HDMI OUT port. The product will indicate as shown below that the image currently displayed on the monitor is the image being input to the HDMI IN port. MA-1 MO-2 The status will be indicated by the Status LED. A message “Now displaying HDMI IN image” will be displayed on the touchscreen.
◆LIMIT OF OUTPUT RESOLUTION ■SIMULTANEOUS OUTPUT SPECIFICATION Priority Usecase HDMI/RGB UVC Miracast Touchscreen Still picture Video Aspect ratio 1080p60 (1920x1080) (1280x720) 720p60 1 HDMI (1920x1080) Not UXGA connected (1600x1200) (1280x720) XGA 800x480 1920x1080 1080p 16:9 (1920x1080) (1920x1080) (1920x1080) 4:3 800x480 1600x1200 UXGA (1600x1200) (1600x1200) (1600x1200) 800x480 1920x1080 (1920x1080) 16:9 (1920x1080) (1920x1080) 720p 4:3 4:3 (1024x768) 1920x108
➌ PREPARATION AND CONNECTION ◆SETTING UP STEP1．Raise STEP2．Raise STEP3. Raise STEP4. Raise the the the the camera head while holding the operating panel. arm as indicated by an arrow. camera head. Set it horizontally. touchscreen monitor as indicated by an arrow. (For MA-1 only) Camera head STEP1 STEP2 Operating panel STEP4 ※For MA-1 only Camera head STEP3 Touchscreen monitor Arm STEP5．Rotate the camera head according to the shooting direction.
◆MOVING PARTS OF THE PRODUCT This product can be moved as shown below. 350° CAUTION Be careful not to let the top of the camera head hit the camera arm.
◆CONNECTING TO A PROJECTOR OR MONITOR Connect the AC adapter HDMI cable or RGB cable 1. Connect the product to a projector or monitor with the HDMI cable or the RGB cable. 2. Connect the supplied AC adapter to [ ]. Then connect the plug to a wall outlet. 3. Long press the Power button to turn on the product. (Power LED：blue) ◆CONNECTING TO A PC The product is compliant with UVC (USB video class) standard. You can transfer the image via USB. Type A USB cable ⇒ Type B USB cable ⇒ USB port 1.
➍ USING THE PRODUCT MA-1 MO-2 MO-2 / ◆TURNING ON OR OFF THE POWER Connect the AC adapter to the product. Connect the AC adapter to a wall outlet. Long press the Power button [ ] to turn on the power. When the Power button [ ] is long pressed again while the power is on, the power will go off. ※The color of the Power LED changes to blue from red after the power is on. ※When the Power button is short pressed while the power is on, the product will enter the standby mode.
OFF connected Charging Connected On Fully Off charged Not connected Power ON Connected - On Blue ○ - ○ ○ Charging On Blue ○ - ○ ○ On Blue ○ - ○ ○ - On Blue × - × × Charging On Blue × - × × On Blue × - × × Fully charged Not connected Standby Connected Red Fully charged ※The image can be displayed after the power is turned on without connecting the AC adapter when the battery is fully charged.
◆ADJUSTING THE FOCUS （MA-1／MO-2） Press the AF button [ ] on the operating panel to automatically focus on the subject. ◆PAUSING THE IMAGE Pressing the Freeze button [ ] on the operating panel to pause the camera image. Press the button again to restart. ※The Freeze icon will be displayed in the Status area during freeze. ※Long press ⇒ To perform the Automatic Deskew function.
◆TURNING ON OR OFF THE LED LIGHTING MA-1 Tap the LED lighting icon [ ] in the Menu area to turn on the LED lighting. (ON: ) Tapping the icon again will turn off the LED lighting. MO-2 Press the LED lighting button [ ] to turn on the LED lighting. Pressing the button again will turn off the LED lighting. CAUTION • To take shots of people, turn off the LED lighting. • Make sure that the light from the LED lighting does not shine directly into your eyes. • This product is equipped with a high-brightness LED.
◆RECORDING VIDEOS The camera image and the added annotations can be recorded as video. ※The recording will be performed at the set recording quality. (⇒P.29 Camera settings “Recording quality”.) MA-1 Press the Record icon [ ] in the Menu area to start the recording of the camera image. To stop the recording, press the icon again. (Recording: ) ※To temporarily change the destination for recorded videos, long press the button or icon.
◆SELECTING THE IMAGE SOURCE The source of the image to be displayed can be switched easily. MA-1 Camera image： Press the Home button [ Document camera icon [ ] to open the Application launcher screen. Then tap the ]. Images being input to HDMI IN： Press the Home button [ ] to open the Application launcher screen. Then tap the External input select icon [ ]. Images saved in the SD card or the USB flash drive： Press the Home button [ ] to open the Application launcher screen.
➎ CONFIGURING THE SETTINGS Various settings of the product can be configured by using the menu (texts and icons) displayed on the touchscreen (for MA-1) or a display device (for MO-2). (MA-1 = touch operation, MO-2 = operation using the mouse connected to the USB port.) ◆START SCREEN At start up, the camera image will be displayed full screen. Press the left tab or the right tab to display the Annotation menu icon. (The same Annotation menu icon will be displayed no matter which tab is pressed.
◆HOW TO CONFIGURE THE SETTINGS MA-1 Press the Home button [ ] on the operating panel to open the Application launcher screen. Select the item to operate. MO-2 Press the Home button [ ] on the operating panel to open the Application launcher screen. Move the cursor by using the Four-way control buttons as shown Left to the right. Press the LED lighting button to execute. （Image rotation） Press the Home button [ ] to return. The installed apps will be displayed in the Application launcher screen.
File manager Digital textbook Configuration To open folders of the internal storage, SD card or USB flash drive. To access the server for the digital textbook to open the digital textbook. To display the Configuration screen. ⇒P.44 ⇒P.37 ⇒P.29 ■How to uninstall the installed application software Long press the icon of the app you want to uninstall to display the Trash can icon. Drag and drop the selected icon onto the Trash can icon to delete the app or hide the icon.
Icon Name Class WiFi Function To display the class name selected by a logged-in user. (This icon does not appear when a user is not logged in.) To display the account. ※When this icon is pressed, the Login screen for “G Suite for Education” will be displayed. To display the WiFi status. Battery To display the battery level and the charging status.（⇒P.40） LAN This icon will be displayed when the LAN cable is connected.
◆DESCRIPTIONS OF EACH MENU Pen menu for annotation When the Arrow icon is selected in the Home screen, the Pen menu, the Eraser menu and the Hand tool menu will be displayed. (⇒See “START SCREEN” in page 22.) Select the menu you want to use. Press or long press the menu to display the sub menu. You can change the type of Pen or Eraser from the sub menu. ※The selected icon will be highlighted.
Eraser Type Eraser Icon Function To delete a line drawn by Pen or Highlighter. If you need to erase a part of the line, press on the line to be deleted or move a finger along the line. To delete all the lines that are drawn on the screen. The Eraser menu will change after performing “Delete all”. To cancel the last “Delete all” action and recover deleted lines. (Only lines deleted by the last action can be recovered.
Icon Main menu Capture Sub menu ○(Long press) Freeze ※1 Image rotation Record Brightness ※1 LED lighting ※1 QR code reader ※1 Home ○(Long press) ○(Short press) Function To capture the camera image and save it as a still picture. To select the destination media. To pause or restart the camera image. To rotate the camera image. （0°／90°／180°／270°） To record a video to the specified media. To select the destination media. To display the Brightness adjustment menu.
to the Gallery with the Return icon. Screen transitions by using gesture（for MA-1’s touchscreen only） When there are multiple whiteboards, you can switch between whiteboards by using gesture. Swipe the screen left and right while touching more than 3 points at the same time to change the whiteboard. Swipe to the right：Board⑤→Board④→Board③→Board②→Board① Swipe to the left：Board①→Board②→Board③→Board④→Board⑤ Configuration Select the Configuration icon [ ] in the Application launcher screen.
Camera quality Brightness White balance 0～6 Auto Cloudy Sunny Fluorescent light Incandescent light Shade Product information Application Version Android Version The brightness of the camera image can be changed. It does not follow the brightness change of the shooting environment. The white balance adjustment constantly works. To ensure a more natural color, the white balance is adjusted automatically according to the shooting environment. The white balance is adjusted for shooting indoor.
on the connected display monitor. For typing the keyboard on the connected display, use the mouse. Device Storage Battery - Available capacity Apps (Data and content item) Still picture and video Audio (Music, ringtone, podcast etc.) Download Cache data Other Mount the SD card - App - - User settings Language and input Total capacity of internal storage Language Spelling correction Word list Japanese English German French Chinese Language - To display the total capacity for each item.
Backup and reset Search To configure whether to display suggestions for Google search during typing. Advanced settings To configure the display of pictograms on the keyboard or to configure whether to display app icons in the launcher. Pointer speed DRM reset - Data initialization - To set the pointer speed using the slider. To delete all DRM license. The confirmation window will be displayed. Select “OK” to delete.
◆DETAILS OF EACH FUNCTION ■QR code reader The QR code reader reads the QR code and starts the browser to access the specified URL. → QR code reader mode Start the Chrome browser Press the QR code reader icon [ ] in the Menu area. The product will enter the QR code reader mode and the camera image will be displayed.（⇒P.28） Tap the QR code reader icon again to finish the QR code reader mode and move to the Camera image screen. CAUTION ・Image annotation cannot be performed during the QR code reader mode.
◆LIST OF CONTENT ITEMS A list of all available content items in the active media (such as the SD card, the USB flash drive and the Google Drive) will be displayed. For information about the supported file extensions, refer to “❽SPECIFICATION”. Press the Gallery icon in the Application launcher screen to display the List of content items screen.（⇒P.23） Menu Media select →Recognized media will be displayed.
NOTE A list of still pictures and videos will be displayed in the List of content items screen. For videos, the Play icon will be displayed in the center of the thumbnail. ■Content item select Select a content item by pressing the Content item select menu in the List of content items screen or by long pressing a content item in the List of content items screen. The menu will change in the Content items select mode. Press a content item to select.
※If the aspect ratio of the selected picture is not 16:9, it will be displayed according to the following rules ① or ②. ①For landscape picture, ②For portrait picture, vertical horizontal position will be position will be adjusted and adjusted and black bars will black bars will appear on the appear on the top and left and right of the screen. bottom of the screen.
■Video To display the Video playback screen. (The paused image of the video will be displayed.) Icon Name Play Seek bar Function To start video playback. This icon will change to the Pause icon during playback. To change the playback position as desired by moving this bar. Playback time To display the elapse time during playback. Maximum playback time Previous video To display the maximum playback time of the selected video. Next video To move to the next video.
◆SPLIT SCREEN Press the Split screen icon in the List of content items screen to display the Split screen select screen. Max. 4 selected content items can be displayed in a single screen. (Video content cannot be selected.) ■Split screen select mode Select the content items to display in the split screen by pressing the thumbnail of the content items. (Number is displayed on the selected thumbnail. To cancel the selection, press the thumbnail again.
■Maximizing the split screen In the Split screen view, the Maximize icon [ ] will be displayed at the corner of each split screen. Press this icon to maximize the selected split screen. Press this icon again to return to the previous size. ■Changing screen positions You can change the positon of the content items in the Split screen view. Long press the content item and move the selected content item by drag and drop action.
➏ ADVANCED OPERATIONS ◆USING SD CARD OR USB FLASH DRIVE By using this product, you can save or record still pictures or videos of the camera image onto the SD card, the USB flash drive, the internal storage or the Google Drive. The saved or recorded still pictures or videos can be displayed. Insert the external memory device (the SD card or the USB flash drive) into the SD slot or the USB connector in the front panel before using it.
◆USING BY CONNECTING TO A PC WITH USB CABLE This product is compliant with UVC (USB video class) and troublesome installing of a driver is not required. You can transfer the camera image to a PC by simply connecting the USB cable to the USB port of the PC. （Operation is not guaranteed on all application software.） CAUTION • Do not disconnect or connect the USB cable during the operation of the operating panel. By doing so may result in malfunction. • We recommend to use the USB cable compliant with USB2.0.
◆CONNECTING TO NETWORK This product can be connected to the network via WiFi or Ethernet. When the WiFi setting is set at power-on, the product will connect to the network automatically. ※WiFi and Ethernet cannot be used at the same time. →Ethernet has a priority over WiFi. (When the product is connected to Ethernet while it is connected to WiFi, the WiFi connection will be disconnected automatically. For MO-2 only The connection status will be indicated by the Status LED during WiFi connection.
NOTE ・When the product is used for the first time or when the battery level is low, wait for 30seconds after connecting the AC adapter and then press the Power button. ・When the remaining battery level is lower than 30%, the icon to indicate the remaining battery level will always be displayed, even when the Status area is hidden. (The icon will not be displayed during charging.) ・The product will be shut down automatically when the remaining battery level becomes less than 10%.
◆USING MIRACAST The product can be connected to a device which supports Miracast to perform Miracast output or Miracast input. By connecting the product to a display device with a receiver attached, you can transmit the image between the product and the display device wirelessly. ※It is not possible to perform Miracast output and Miracast input at the same time. ※If either of them is enabled, the other cannot be enabled.
■Miracast input The screen of the Miracast supporting device can be displayed on the screen of the product. (Mirroring) ①Display the Application launcher screen and select Miracast [ ]. ②Select “Allow other device to find the product”. ③ Select the product from the menu of the connected Miracast device after the Connection device search screen is displayed. ④The image of the connected Miracast device will be displayed on the screen of the product once the connection is successfully established.
◆ELMO PLAY You can download the app from the portal run by ELMO. The selected app will be downloaded and installed automatically, which can be used with the product. For further information, visit the portal at: ◆USING FILE MANAGER By selecting the File Manager in the Application launcher screen, you can access the storage devices such as the internal storage, the SD card and the USB flash drive. You can install the app by inserting the SD card after saving the APK file onto the SD card.
◆DOKO PITA (AUTOMATIC DESKEW FUNCTION) By using this function the product will automatically detect the skew angle of the document such as a printing paper and a textbook in the shooting area and correct it to fit the screen. ※The image will be rotated, enlarged, reduced or placed in the center. From 0° to 45° ＜Procedure＞ ①Place a document in the shooting area. ②Long press the Freeze button. ③Automatic positioning detection will be performed and the detected area will be indicated by a red line.
➐ LIST OF ERROR MESSAGES Error item Error message Possible cause SD card Could not play file. ・The file is broken. ・The file extension is not supported. ・The SD card was removed. USB flash drive Could not play file. ・The file is broken. ・The file extension is not supported. ・The USB flash drive was removed. USB host Internal storage USB flash drive cannot be ・Unknown USB flash drive was recognized. connected. Could not play file. ・The file is broken. ・The file extension is not supported.
➑ TROUBLE SHOOTING ◆SYMPTOMS AND CONFIRMATION Check the following items. If any abnormality is found, consult the dealer from whom you purchased this product or our nearest branch/office. Symptom No image is displayed. The output image (resolution) changes automatically. The image is out of focus. The image is too dark. Possible cause/ remedy ・ The cable is not correctly connected. ・ The AC adapter is disconnected from the power supply socket of the product or the wall outlet.
To cancel the freeze, tap the Freeze icon in the Menu area or press the Freeze button on the operating panel. MO-2: Press the Freeze button on the operating panel. ・ Reconnect all the cables. ・ This may be interference fringes between dots of printed matter and TV scanning lines or CMOS pixels. Changing the shooting range may improve the problem. ・ The image may be distorted when shooting a monitor screen while the live image feed is displayed. ・ Vertical stripes may appear on an LCD projector image.
About long-term usage of this product Due to the lifetime of its parts, if this product is used for longer than the warranty period, its performance and quality may deteriorate. In this case, we will replace the parts for a charge. Consult the dealer from whom you purchased this product or our nearest branch/office. ➒ SPECIFICATION ■MAIN CAMERA Item Specification DC5V 14W Power source Power consumption Weight Ext.
your PC and the status of the USB bus. Radio standard：IEEE802.11 a/b/g/n Communication frequencies：2.
Flicker setting 50Hz / 60Hz / Auto / Off Depending on the destination Recording quality Language High / Normal / Low Normal Japanese/ English/ German/ French/ Chinese Automatic Miracast connection Wifi On / Off To be set at the initial startup On On / Off Off Rotation angle 90° / 180° 90 55 Setting value will be maintained.
■ TRADEMARKS AND LICENSES and Image Mate are registered trademarks of ELMO Co., Ltd. HDMI, logo and High-Definition Multimedia interface are trademarks or registered trademarks of HDMI Licensing LLC. Windows and/or other Microsoft products referenced herein are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Google, Google Chrome, Android, are registered trademarks of Google Inc.
OVERSEAS SUBSIDIARY COMPANIES ELMO USA CORP. □Headquarters 1478 Old Country Road Plainview, NY 11803, U.S.A. Tel. (516) 501-1400 Fax.(516) 501-0429 E-mail： elmo@elmousa.com Web：https://www.elmousa.com/ ELMO Europe SAS □Headquarters 12 place de la Défense Maison de la Défense 92974 Paris la Défense Cedex FRANCE Tel. +33 (0) 1 73 02 67 06 Fax. +33 (0) 1 73 02 67 10 E-mail：info@elmoeurope.com Web：https://www.elmoeurope.com/ □German Branch Hansaallee 201, Haus 1 40549 Düsseldorf Germany Tel.
