User manual

- 10 -
AC IN
RS-232C
DC12V
Ethernet MOUSE
INPUT
S-VIDEO
VIDEO L AUDIO R
AUDIO
(
L/R
)
1
AUDIO
(
L/R
)
2
ABCD
RGB OUT
RGB2
RGB1
OUTPUT
ON
OFF
POWER
31. Power Cord
Receptacle
[
AC IN
]
32. Power Switch
[
POWER
]
33.
12VDC Out Terminal
[
DC12V
]
34. Mouse Terminal
[
MOUSE
]
39. Vide-out Terminal
[
OUTPUT
.
S-VIDEO/VIDEO
]
S-Video
(
mini DIN 4P
)
, Composite video
(
RCA pinjack
)
36. Ethernet Terminal
[
Ethernet
]
40. Audio-out Terminal
41. Video-in Terminal 1
42. Video-in Terminal 1
38. Analogue RGB-out Terminal
[
OUTPUT
.
RGB OUT
]
43.
Audio-in Terminal 1
44. Audio-in Terminal 2
45. DIP Switch
37. USB Terminal
[
USB
]
35.
RS-232C Terminal
[
RS-232C
]
USB
Name Function
Reference
Page
Power Cord Receptacle
[
AC IN
]
Connected to the power cord connector.
Power Switch
[
POWER
]
12VDC Out Terminal
[
DC12V
]
To turn ON/OFF the power supply.
Mouse Terminal
[
MOUSE
]
To connect the mouse (supplied accessory).
Vide-out Terminal
[
OUTPUT
.
S-VIDEO/VIDEO
]
S-Video (mini DIN 4P)
Composite video (RCA pinjack)
Image is output when these terminals are connected
to the NTSC/PAL monitor (e.g., TV monitor).
Ethernet Terminal
[
Ethernet
]
To connect the Ethernet cable when the network function is used.
Analogue RGB-out Terminal
[
OUTPUT
.
RGB OUT
]
Image is output when this terminal is connected to RGB input
equipment (e.g., liquid crystal projector, multi-sync monitor).
USB Terminal
[
USB
]
To connect the USB cable (attached) to transfer the image or
control the main unit with the CD-ROM “Image Mate” (attached).
RS-232C Terminal
[
RS-232C
]
P.19
P.19
P.31
P.14
P.23
P.37
P.23
P.32
P.46
31.
32.
33.
34.
39.
36.
38.
37.
35.
To connect the RS-232C cable when controlling the
main unit from the PC.
To output 12VDC and the image. Can be connected to
the LCD monitor (LM-5011N) (option) by using
the LCD monitor connection cable (attached).
Note: This terminal cannot be used when the USB terminal
is used to control the main unit.
Note: Do not connect the equipment other than LM-5011N.
Note: This terminal cannot be used when the RS-232C is
used to control the main unit.
Audio-out Terminal
Audio signal is output when this terminal is connected
to audio-in equipment.
P.2340.
Rear Panel