VISUAL PRESENTER EV-200 INSTRUCTION MANUAL Please read this instruction manual carefully before using this Visual Presenter and keep it for future reference.
IMPORTANT SAFEGUARDS recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. Retain Instructions – The safety and operating instructions should be retained for future reference.
Grounding or Polarization – This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet.
Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. When the power-supply cord or plug is damaged.
SA 1965 SA 1966 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
BEFORE YOU USE Use the Visual Presenter under the rated electrical conditions. Do not leave the Presenter under direct sunlight or by heaters, or the Presenter may be discolored, deformed, or damaged. Do not place the Presenter in any humid, dusty, windy or vibrating location. Use the Presenter in the following environmental conditions: Temperature: 0°C~40°C (32°F~104°F) Humidity: 30%~85% (No condensation) Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such as thinner or benzine.
CONTENTS IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 BEFORE YOU USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2. SETTING UP AND STORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2-1 SETTING UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2-2 STORING . . . . . .
1.
No. Name 1 Camera Head 2 Arm Base Unit Main Stage Auxiliary Stage 3 4 5 6 Shutter Switch [SHUTTER] 7 Image Input Selection Switch [INPUT] 8 Power Switch [POWER] Power Terminal [DC IN 12V] Accessory Case 9 10 11 12 Video Cable AC Adapter Function Moving up/down the camera head can change the size of an object in display on the monitor screen smoothly. A link part for moving the camera head horizontally. A base part of the Presenter. A stage for placing an object thereon.
13 Gain Button [GAIN] 14 Composit-Video-in terminal [VIDEO IN] 15 Composit-Video-out terminal [VIDEO OUT] 16 Flicker Switch [FLICKER] - Normally 60 17 S-Video-out terminal [S-VIDEO OUT] -9-
No. Name 13 Gain Button [GAIN] 14 Composit-Video-in Terminal [VIDEO INPUT] 15 Composit-Video-out Terminal [VIDEO OUTPUT] Flicker Switch [FLICKER] 16 17 S-Video-out terminal [S-VIDEO OUT] Function To adjust the image brightness by manipulating the gain button [UP]/ [DOWN]. Note: - The gain setting is kept after turning the power supply OFF. To connect other image output unit.
2. SETTING UP AND STORING 2-1 SETTING UP Gently release the clipped area (as marked with arrow) of the right and left stages as illustrated. Note:- It may be damaged by unlatching the stages putting hands on other position not shown by arrows. - When the accessory case is housed inside, be careful not to drop it. Connect the Composit-Video-out terminal [VIDEO OUTPUT] of the Presenter to the monitor TV with the Video cable (supplied).
2-3 ZOOMING Zoom-out By moving up/down the camera head, the object in display on the monitor screen can be zoomed-in or zoomed-out. In zoom operation by moving up/down the camera head, focus adjustment is not required (FOCUSFREE).
3. TROUBLESHOOTING HINTS Symptom No image is on the monitor or project. Checkpoint • Is the video cable connected properly? • Is the AC adapter inserted correctly? • Is the DC jack inserted firmly in the power terminal [DC IN 12V] of the Presenter? • Is the power switch [POWER] ON? • Is the image-in selection switch [INPUT] set at [VIDEO IN]? The image flickers. • The light from the discharge tube (50Hz) does not come to the screen. This trouble may be reduced by setting the flicker switch to [50].
4. SPECIFICATIONS General Power voltage Power consumption Outside dimensions Mass Optical Lens Shooting area 12VDC 2VA 361mm(W)x285mm(D)x161-284mm(H) (14.2in.(W)x11.1in.(D)x6.3-11.2in.(H)) 59mm(W)x285mm(D)x161mm(H) (2.3in.(W)x11.1in.(D)x6.3in.(H)) 1.5kg (3.3lbs) F: 5.8, f= 3mm 364mmx271mm (14.3in.x10.7in.) 179mmx135mm (7.1in.x5.3in.
WARNING: Unauthorized recording of copyrighted slide films, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. ELMO CO., LTD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMPANIES U.S.A. ELMO Mfg. Corp. 1478 Old Country Road, Plainview, NY 11803-5034 Tel:(516)501-1400 Fax:(516)501-0429 E-mail:elmo@elmousa.com web:http://www.elmousa.com/ Canada ELMO Canada Mfg. Corp.
