Security Camera User Manual

6
QUICK STARTING
The section is a quick reference for users to manipulate a dome camera in a short
time. We explain the operational method through different keyboards.
FUNCTION DEFINITION
■ Preset Function Definition
Preset point means that dome camera will save pan/tilt/zoom positions to its memory.
You can recall the preset position through this function.
■ Auto-Pan Function Definition
Auto-Pan means that dome camera will scan a predicted region. The region is defined
by “start point”,”end point”, “scan direction” and “scan speed”.
Dome camera will scan a region from “start point” to “end point” according to the “scan
direction” and “scan speed”.
Dome camera will do pan motion continuously without limit if user set the start point the
same as end point.
You can manipulate zoom in/out function when the dome camera is executing
Auto-Pan function.
■ Sequence Function Definition
Sequence means that dome camera will switch its view between different preset
positions.
The sequence parameters are “preset point”, “jump speed” and “dwell time”.
Dome camera will switch its view according to the sequence parameters. It will go to
the “preset position N” with “jump speed S” and stay there for a period with “dwell time
T”. Then dome camera will go to the second preset position with the parameter 2….etc.
■ Cruise Function Definition
Cruise means that dome camera will patrol a special path. This path is generated by
joystick movement. The memory sizes of dome camera limit the length of cruise path.
After the memory of dome camera is filled up, it will stop to record the latter path. When
you recall cruise function, it will patrol the path which is stored in memory.