Security Camera User Manual

26
IRIS
With this option, the IRIS priority is higher than SHUTTER and AGC circuit will
function automatically to get consistent exposure. After the IRIS is selected manually,
the action of exposure compensation depends on the AGC circuit.
AGC
With this option, the AGC priority is higher than SHUTTER and IRIS circuit will
function automatically to get consistent exposure. After AGC is selected manually, the
action of exposure compensation depend on changing the IRIS of Lens
6. WBC MODE
You can select one of six White Balance Control modes as described follows:
AUTO
In this mode, white balance works within its color temperature range.
MANUAL
In this mode, you can control the Write Balance value manually, R gain and B gain
adjustable range from 0 to 100.
7. ID DISPLAY
You can display the ID of dome on monitor or not.
ON
Display the ID address of this dome.
OFF
Do not display the ID address of this dome.
8. SETUP
You can adjust some parameters under SETUP item.
FLIP (IMAGE/ ME/OFF)
User can track an object continuously when it passes through under dome camera
with setting flip item to IMAGE/ ME.
IMAGE item enable user to keep tracking object seamlessly through image flip
technology. ME item is a standard function which is the same as AUTO-FLIP function.
ZOOM SPEED
You can select a suitable zoom speed.
SPEED BY ZOOM
The tracking speed is adjusted by internal algorithm. The lager zoom ratio the lower
rotation speed.
AUTO CALI.
The default setting is OFF.
DIGITAL ZOOM
Digital zoom ratio is adjustable from 1 to 12.