ENGLISH ESD-380 User’s Manual HEAVY DUTY MODEL Before attempting to connect or operate this product, please read these instructions completely.
CONTENTS PREFACE....................................................................................................................2 FEATURES..................................................................................................................3 PRECAUTIONS...........................................................................................................5 QUICK STARTING ......................................................................................................
PREFACE The speed dome is a new subcompact dome camera system designed to deliver superb performance and durability with a pristine housing that looks good in any security and surveillance installation. This speed dome contains new generation advanced DSP color camera, with 22X optical zoom multiply 12X digital magnifier (23X optical zoom with 12 digital magnifier are selectable items), delivers the power of a 364X zoom (276X zoom) to make sure that the finest details are captured.
FEATURES CAMERA FEATURES 1. Optical performance: (1). DR model: 23X optical zoom with 12X digital magnifier. (2). S model: 22X optical zoom with 12X digital magnifier. 2. Continuous Auto-focus or manual focus 3. Minimum illumination: (1). DR model: 23X lens: 0.01 lux (0 lux: IR illuminator ON) (2). S model: 22X lens: 1 lux 4. Advanced DSP camera provide: (1) Auto white balance (2) Back-light compensation (3) Auto iris control (5) IR-cut filters removable mechanism. (DR model only) (6) Electronic shutter 5.
ROTARY BODY FEATURES 1. 5” compact, low profile color dome camera 2. 360° endless rotation 3. Pan speed up to 375° /sec 4. Tilt speed up to 300° /sec 5. Preset function enable user to record different 128 viewpoints what you want. You can set Pan/ Tilt/ Zoom for every preset position. 6. Proportional Zoom enables Pan/ Tilt speed inverse proportional to zoom ratio. You can track an object easily with this function. 7.
PRECAUTIONS 1. Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. 2. DO NOT disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for servicing. 3.
QUICK STARTING The section is a quick reference for users to manipulate a dome camera in a short time. We explain the operational method through different keyboards. FUNCTION DEFINITION ■ Preset Function Definition Preset point means that dome camera will save pan/tilt/zoom positions to its memory. You can recall the preset position through this function. ■ Auto-Pan Function Definition Auto-Pan means that dome camera will scan a predicted region.
QUICK START FROM ESD-CC1 KEYBOARD Please press button and enter the ID of dome to start to control the selected dome camera. ■ Preset Function Operation ■ Setting Press a number key for preset point such as <2>. Press to record this position as preset point 2. ■ Recall preset position Press a number key for preset point such as <2>. Press to go to the preset position 2. ■ Auto-Pan Function Operation ■ Setting 1. Press to entering Auto-Pan mode.
1. Press a number key to set a sequence line such as <1>. Press to start modifying parameters of sequence 1. 2. LCD is displaying “001. PST SPD DWELL” now. You can edit the parameters such as <4> for PST, <1> <5> for SPD and <5> for DWELL. That means that the first preset point for sequence 1 is preset point 4, dome camera will staying 5 seconds there and dome will go to next preset with speed 15. 3. LCD is displaying “002.PST SPD DWELL” now. Please edit the parameters. 4.
SWITCH SETTING SWITCH DEFINITION A B C A. ID Setting (SW1~SW3) B. Dome Control Protocol C. RS-485 Setting ID Setting Use SW1 ~ SW3 to change your speed dome ID by turning the arrow to the desired number respectively.
Dome Control Protocol Refer to below table and turn the arrow to choose a protocol for your speed dome. SW No. 00 01 02 03 04 05 Protocol VCL Pelco D Pelco P None Chiper Philips SW No. 06 07 08 09 10 11 Protocol None ELMO AD 422 DS2P Pelco P None Simplex DSCP SW No. 12 13 14 15 Protocol None None None None RS-485 Setting Refer to below table for desired RS-485 settings of your dome camera.
Alarm Pin Definition 11
INSTALLATION STEP 1: Unpack the dome package and take out the dome bodies. STEP 2: Rotate the top holder and take it off from the upper dome body. STEP 3: Rotate the smoke bubble and remove it.
STEP 4: Now install the dome cover to protect the camera lens. Before actually doing that, apply some lubricant on all surface of water-proof rubber on the upper dome body to make the installation process smoother. Note that the tiny protrusion on upper dome body must match to one of the four holes on lower dome body. Gently pressure the upper dome body downward with two hands on the side of the cover.
STEP 5: Screw the two dome bodies together. It should be done if the lower dome body looked swelled. STEP 6: If needed, assemble the sunshield for outdoor use. STEP 7: Fix the sunshield to the dome with three screws. STEP 8: Connect the attached RS-485, power and BNC cables with your arranged cables.
STEP 9: Put the cables through the gooseneck and top holder. the STEP 10: Mount the top holder to the gooseneck and rotate the top holder clockwise. STEP 11: Then connect the cables to the dome body.
STEP 12: Mount and screw the dome to the top holder. Put on the rubber lastly.
CONNECTION CABLE CONNECTION 22-PIN CONNECTOR DEFINITION The definitions of the pins on the 22-pin connector are listed as below table. No.
RS-485 Connector Please connect keyboard to Speed Dome through the terminal block. The communication interface between Speed Dome and Keyboard is RS-485. Maximum cable length for RS-485 communication over 24-gauge wire is 4000 feet (1219 meters). The recommended cable for RS-485 communication is CAT 5 cable.
OSD DISPLAY FORMAT OSD DISPLAY FORMAT 1 3 2 4 6 5 < Fig1. OSD DISPLAY POSITION> POSITION FUNCTION OSD DISPLAY DESCRIPTION 1 FOCUS MODES A Auto Focus Mode M Manual Focus Mode 2 BACKLIGHT X Back Light Compensation OFF B Back Light Compensation ON 3 ALARM ALARM Alarm Message 4 ZOOM RATIO X1 Present Zoom Ratio 5 TITLE 6 CAMERA ID 1. Max. 20 letters for each title. 2. 16 sets of titles are available.
SPECIFICATIONS GENERAL FEATURES ROTARY BODY FEATURES Environment Indoor / Outdoor Controller I/F Operating Temperature RS-485 Pan Travel ESD-380 360 Degree Endless -30° – 45 °C Tilt Travel -99 ~ 99 Degree Power Source Max Power Consumption 24 VAC 52W w/o Sunshield: 234 x 305mm Dimensions w/ Sunshield: 263 x 305mm Weight Manual Speed Preset Speed 5.8kg 1~90 Deg/s Pan 1~375 Deg/s High Resolution Tilt 6~360 Deg/s Standard Standard: 768 steps/circle High Res.
SYSTEM ARCHITECTURE SYSTEM ARCHITECTURE 21
APPENDIX - OSD MENU This camera utilizes a user setup menu that is displayed on-screen. This setup menu contains various sub menus that from a tree-type structure as shown below.
TITLE DISPLAY TITLE SETTING ALARM SETTING ON OFF 000 ~ 016 HOME SETTING ENTER ENTER SEQUENCE ENTER AUTOPAN ENTER CRUISE ENTER ALARM PIN ALARM SWITCH 1~4 OFF ON ALARM TYPE N.O. N.C. ALARM ACTION POINT SEQUENCE POINT PRESET POS 001 ~ 128 SEQUENCE LINE 1 ~ 4 DWELL TIME 001~ALWAYS SEC. EXIT YES HOME FUNC. ON / OFF SELECT MODE PRESET SEQUENCE AUTO-PAN CRUISE RETURN TIME 1 ~ 127 MIN. PRESET/ AUTOPAN/ SEQUENCE/ CRUISE GO ENTER EXIT SEQUENCE LINE. 1 ~ 4 SEQUENCE 1 ~ 32 POINT PRESET POS.
IR FUNCTION WDR SETTING AUTO THRESHOLD IR COLOR EXIT ON NONE (22X ) ENTER WDR SWITCH WDR FUNCTION LOW. MID. HI. B/W.
OSD MENU There are two pages of OSD setup menu allow users to control the camera parameters, these functions are described in the following sections in detail. Please use LEFT/ RIGHT/ UP/ DOWN of direction keys to select your parameters. MENU ITEM 1. DEFAULT If you select ON for this item, all the camera parameters will be restored to the factory initial (default) data. Once you modify any of the following items, this item becomes OFF. 2.
IRIS With this option, the IRIS priority is higher than SHUTTER and AGC circuit will function automatically to get consistent exposure. After the IRIS is selected manually, the action of exposure compensation depends on the AGC circuit. AGC With this option, the AGC priority is higher than SHUTTER and IRIS circuit will function automatically to get consistent exposure. After AGC is selected manually, the action of exposure compensation depend on changing the IRIS of Lens 6.
SLOW SHUTTER You can set the slowest shutter speed. With the slowest shutter speed, you can see objects in a dark environment under 0.2 lux. With a higher shutter speed, you can see a smooth video image from camera ANGLE ADJUSTER (MIN/ MAX) User can see more area higher if they adjust the MAX angle to +99 degree. User can see more area lower if they set the MIN angle to -10 degree. RESET Reset the Speed Dome. EXIT Exit the SETUP menu. 9.
to “SP” and press 11. ALARM SETTING Alarm parameters can be set on this page. ALARM PIN Choose an alarm connector what you want to set its status. ALARM SWITCH Turn ON/ OFF alarm function. ALARM TYPE There are two kind of alarm types can be selected. One is normal open the other is normal close. ALARM ACTION User can choose what kind of action should be executed when the alarm condition taken place. There are two kind of alarm actions can be set.
This item is detailed mode setting of home function. This item will vary with ‘SELECT MODE’ item. GO. Go to execute home function (HOME FUNC ON only). EXIT Exit the HOME SETTING menu. 13. SEQUENCE Sequence parameters can be set on this page. SEQUENCE LINE There are four sets of sequence lines built in dome camera. You can choose a line to execute. Please use LEFT/ RIGHT of direction key to select your sequence line. SEQUENCE POINT There are 32 sets of sequence points can be specified in every sequence line.
TO SAVE: Press ‘ENTER’ to set this position as end point and escape joystick mode. DIRECTION Rotational direction of dome camera. SPEED AUTOPAN function will rotate camera with this speed. RUN AUTOPAN Execute AUTOPAN function. EXIT Quit the AUTOPAN menu. 15. CRUISE Cruise parameters can be set on this page. RECORD START Command dome to start to record “CRUISE PATH”. STEP1: Press ‘ENTER’ to go into joystick mode. Dome will move blink words to ‘RECORD END’ automatically.
WDR FUNCTION You can edit all parameters of WDR by yourself. EXIT Exit this page. 18. PRIVACY You can program the privacy zone position with this option. PRIVACY SWITCH You can display “Privacy masks” with this option. SHADE The color of privacy mask can be selected through this option. SET MASK After you press “ENTER” on this item, dome will memory this position as “privacy mask position”. You can select form Mask1 to Mask8 for this item.
APPENDIX - PELCO The Speeddome can be controlled through a keyboard which built in D protocol and P protocol. Please follow the instruction to manipulate our Speeddome with a keyboard which built in D protocol and P protocol. SYMBOL DEFINITION A single button which can command a dome to go to specific preset position. (1) A single button which can set preset parameter ( D Protocol).
CABLE LENGTH The communication interface between Speed Dome and Keyboard is RS-485. Maximum cable length for RS-485 communication over 24-gauge wire is 4000 feet (1219 meters). CAT 5 cable is recommended.
APPENDIX - PHILIPS ALLEGIANT The dome cameras can be integrated into Philips Allegiant systems through A repeater. Please follow the instructions to control dome cameras through Philips Allegiant systems. SYMBOL DEFINITION A physical single button : Command dome cameras to go to specific preset position. A physical single button : Set preset position. SPECIAL FUNCTION 7 6 1. Exit OSD menu direct 7 7 1. Open or close OSD menu. 2.
1478 Old Country Rd. Plainview, NY 11803 www.elmousa.
