User manual

6.
Set the Duration of Sound (1 – 100 sec) to determine how long the *.wav file will play
7.
Configure the Area Alarm Setting for the selected detection zone by selecting one of the following conditions:
a.
In the Condition drop-down menu, choose any to trigger an alarm every time human/vehicle/object presence is
detected in the defined area.
b.
In the Condition drop-down menu, choose “=” (equal to) in the drop-down menu and enter the desired number
of persons/vehicles/objects. This way the alarm will be triggered only if the specified number of persons/vehicles/ob-
jects is met in the defined area.
c.
In the Condition drop-down menu, choose “>=” (greater or equal to) in the drop-down menu and enter the
desired number of persons/vehicles/objects. This way the alarm will be triggered only if the specified number of
persons/vehicles/objects is met or exceeded in the defined area.
3.23.3.2. Configuring CrossWire alarm
The CrossWire alarm detects any human/vehicle/object that is crosses the specified boundaries in a predetermined direction
and initiates an alarm.
Please note that the CrossWire alarm option will not be available for the overhead-mounted cameras and in the crowded
locations.
Note
Due to the background registration tech-
nique the persons, who remain in the same
position, without moving, for an extended
period of time will not be detected.
To configure CrossWire alarm, do the following:
1.
Choose CrossWire in the Alarm menu
2.
Choose the CrossWire drawing tool
3. Draw the detection zone in the live-view window. A total of three CrossWire detection alarm zones can be drawn.
79ELMO DVR User Manual v5.01
VideoLogix™ SetupELMO DVR Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/