User manual

10.

Choose the desired folder. Name the map. Choose 24-bit Bitmap in Save as type and click Save.

3.16.3. Configuring Emap

To configure the E-Map in the ELMO DVR Server, do the following:

1. Open ELMO DVR Server Setup and go to the E-Map tab.

Click Enable E-map to activate the E-Map on the main screen.

Choose the Screen Division in which the E-Map will appear.

Choose the Position No. (screen) number in which the E-Map will appear on the main screen. In this example,

ELMO DVR will display the screen division for 4 cameras with the E-Map being displayed in the first screen. The pos-

itions with configured E-maps will be checkmarked

54ELMO DVR User Manual v5.01

E-Map SetupELMO DVR Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/