User manual

3.11.2. Configuring Server Information Setup
The Server ID is a user chosen security code, to be entered when connecting remotely through ELMO DVR Remote
or Websecurity. The Server ID can consist of up to 7 alphanumeric characters. When trying to connect to the server from
a remote location, the system will check the Server ID, user Name and Password together. If any of these variables is
incorrect, connection will fail.
In Server Information enter the following:
1. Server ID (7 alphanumeric characters - digits/letters)
2. Server Name
3. Location
30ELMO DVR User Manual v5.01
Server InformationELMO DVR Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/