User manual

PTZ Camera Menu - this area is specific to each PTZ camera. The OSD button for Speed
dome camera will be replaced by AUX (Auxiliary) button for other supported PTZ camera models.
This function allows changing the camera settings remotely through the software, as opposed to
adjusting settings manually on the mounted camera.
Pan/Tilt Speed – this is the speed of the camera response to the user input. Increase the
Pan/Tilt speed for the PT camera to move faster. Increase or decrease Pan/Tilt speed by clicking
the arrows.
Pan/Tilt Setup – adjust camera Pan-Tilt position by clicking the arrows up and down for Tilt;
left and right for Pan.
Focus - Focus the image by clicking + and - signs
Zoom - Zoom the PTZ camera in and out by clicking + and - signs
Preset Touring - this setup allows for the configuration of the presets used by the Preset
Touring function.
Preset Setup - this menu allows for the set up of up to 10 presets for
each PTZ camera. A preset is the unique combination of Pan, Tilt and Zoom
values for each camera that gets recorded and stored by the ELMO DVR Server.
After the preset is programmed, only one button has to be clicked to position
the camera in the specific direction and/or zoom in/out instantly. The presets
11ELMO DVR User Manual v5.01
PTZ modeELMO DVR Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/