Specifications

59
5-2 View Setup
Clicking the “Screen” tab will display the view setup screen as following.
1. There are 7 kinds of Display mode, 4 splits, 6 splits, 8 splits, 9 splits, 10 splits, 13 splits,
and 16 splits.
Click the “small block” on the split screen, and then you can modify the camera shown on
each split screen. An example for the description of the all cameras when doing the view
setup is located on the right side of the table.
2. Sequencer Setting
There are 1 channel and 4 channel sequencer modes. For the one channel sequencer mode,
you can set up the desired sequencer order and duration (up to 300 seconds). For the four-
channel sequencer mode, the display format is 4 spilt and you can set up its sequencer
duration.
3. “ Deinterlace” in SV2000
This function provides “Deinterlace” in display mode and only SV2000 has this function.
You can “Enable” it if you want to have “Deinterlaced” video quality in display mode.