Specifications

56
10. Copy Camera Setting: After finishing the camera setup for one camera, you can click the
“Copy Camera Setting” button, located on the upper right of the “Camera Setup” screen, to
copy the setting of this camera to other cameras. This saves time and effort. Below dialog
will appear. Click the setting area you would like to copy (Refer to the three “areas”
below), and then click the cameras located on the right of the screen and click “OK”.
5-1-2 IP Camera (Optional)
Before you start to set the IP camera configuration, you should connect the IP CAM to a
HUB/switch and set up the IP address of the IP cam in the software provided by your IP cam
supplier.
1. Click “Add” tab on the upper left of Camera List Window.
Add