Specifications

49
 Event Recording:
(1) Events (Motion/DI): Set up the Motion or DI event to trigger DVR recording.
(2) Event Occur: Set up recording frame rate when event occurs.
(3) Event Not Occur: Set up recording frame rate when event does not occur. There
are two options to select. One is “pre/pos Recording and the other one is “Low
frame Rate recording. For the pre-Record setting (0/1/2/3/4/5/6/7/8/9/10) is to
record a certain seconds before an alarm happens. And post-Record setting
(0/1/2/3/4/5/8/10/15/20) is to record a certain seconds after an alarm happens.
5-1-2 Routine Type: By the unit of day, DVR will repeat the same recording type during
the period you select.
#Step 1: Set the period you want to repeat the same recording type. Select the Start
Date and End Date.
#Step 2: Set the “ Start Time and End Time” of one day.
#Step 3: Set the “Recording Type” in this recording period of a day. Please refer to
the Week (Cycle type) above.