Specifications

46
5-1-1 Analog Camera Setup
1. Select the desired camera for setup.
2. Camera Name: Use the “keyboard figure” on the right of “Camera Name” field to enter
the description for the camera.
3. Camera Status (Disable/Enable/Hide): If the channel is not connected to a camera, set
“Disable”. If it is connected, set “Enable”. If you do not want the camera image to be
showed on the main screen, set “Hide”.
!
Note
If a camera is set as “hidden”, the video is still recorded in the hard disk.
4. Properties : Set each camera recording behavior.
4-1 Quality (Poor/ Low/ Middle/ High/ Best): You can adjust the recording quality. The
higher the quality setting, the more hard disk space will be consumed.
4-2 Resolution: You can adjust the recording resolution. There are several resolution
modes for selection depending on the DVR model that you install. The higher the
number, the better the quality. However, the higher quality setting will consume more
hard disk space.
4-3 Digital Signature (Enable/Disable): The setting allows you to encrypt digital
signature (watermark) to the video content.
4-4 Audio: Beside the video, this DVR system also supports audio input on video
channel. The number of audio channel supported by your DVR system depends
on the model you install from one channel to maximum 16 channels. If you want