Specifications

12
enabled the “ Motion/Alarm to Zoom” function, it will not be zoomed and will not be marked
in red frame even there is a motion or alarm triggering in this channel.
3. If there is no other motion or alarm triggering, the current zoomed channel will be
continually kept in “ Motion/Alarm Zooming Area”. If yes, the zoomed channel will stay in
“ Motion/Alarm Zooming Area” just for three seconds and will be replaced by the one from
any channel waiting for zoomed. If there is more than one motion or alarm triggering at the
same time, the zooming rule will be as following,
a. The previous zooming channel will be the first priority for zooming again and others will
be marked in red frame to wait for zooming in after three seconds. However, the number of
continually zooming the same channel will be limited to three times. After three times,
even this channel is with motion or alarm triggering again, the motion/alarm zooming area
will show the screen of other channel. If the motion or alarm in one of the channels waiting
for zooming and marked in red frame disappears within three seconds waiting time, this
channel will not be zoomed in and the red frame will disappear.
b. If the previous zoomed channel does not have motion or alarm again, the first priority
being zoomed is the channel of which number is the smallest. For example, if channel #3
and channel #7 are with motions or alarms triggering at the same time, channel #3 will be
zoomed in firstly for three seconds and the screen of channel #7 will be marked in red
frame to wait for zoomed in after three seconds.
Select the channels you want to enable “ Motion to Zoom” function