Specifications

11
3-2 Motion/Alarm to Zoom
The function of “ Motion/Alarm to Zoom” is zooming in the screen when there is any motion
or alarm occurring. After clicking
icon, it will activate the “Motion/Alarm to
Zoom“ mode.
Motion/Alarm Zooming Area
Motion Picture
1. To set up “ Motion to Zoom”, you must go to the “ Alarm Notice” sub-menu under “System
Setting” to set up the channels that you want to enable this function. To set up “Alarm to
Zoom” function, you need to go to “DI/DO” sub-menu under “System Setting” to set up the
zooming channels that will be triggered by DI. Click “ DI/DO” sub-menu in “ System setting
and then select “DI->Zoom”. Next, click channels in which you want to enable “Alarm to
Zoom” function and then return to the “Main Menu” to click the “ Motion/Alarm to Zoom”
icon.
2. When the channel enabled by “ Motion/Alarm to Zoom” function is with motion occurring
or alarm triggering, this channel will be zoomed in the “ Motion/Alarm Zooming” area and a
“Motion/Alarm Picture” will replace the original screen of this channel. If the channel is not