Specifications

101
DVR connection type is RS232/RS485 COM Port:
*COM Port: Please select the correct COM Port you use to connect the POS to
DVR.
*Baud Rate: POS Data transmission speed through COM Port to DVR. Please set up
the Baud according to your POS device.
*Start Bit: Please set up the Start Bit according to the COM port transmission spec
of your POS device.
*Data Bit: Set up the data bit according to the COM port transmission spec of your
POS device.
*Parity: Set up the Parity according to the COM port transmission spec of your POS
device.
*Stop Bit: Set up the Stop bit according to the COM port transmission spec of your
POS device.
DVR connection type is Ethernet:
*IP: Enter the IP address of the RS232 to Ethernet converter.
*Port: Set up the corresponding port of RS232 to Ethernet converter.