User Manual

| www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH

Maintenance and repair

7.2 Maintenance work

Interval Maintenance to be carried out Section

monthly Check the pipes and screws for leaks and to ensure they are

seated properly and if necessary seal again or tighten up.

—

monthly Check the cooling water system and the pipes. —

monthly Check the terminal box and cable inlet holes for leaks and if

necessary re-seal.

—

monatlich Kühlrippen der Maschine und des Motor reinigen. —

monthly Check the oil level 7.2.1

7,500 h Changing the oil

depending on how dirty the

discharged medium is

Clean intake air ﬁ lter

Clean gas ballast valve ﬁ lter

7.2.2

at least once a year Check for coupling wear 7.2.3

monthly Check the cooling water system and the pipes. 7.2.4

depending on how dirty the

cooling liquid is

Clean dirt trap