Manual

Technical Data
610.44434.40.000 8 / 32 © Gardner Denver Deutschland GmbH
Two-impeller design
Weight
Type [kg]
approx.
[lbs]
approx.
2BH181.-7..3. 203 448
2BH181.-7..4. 215 474
2BH184.-7..2. 177 390
2BH184.-7..3. 203 448
2BH191.-7..1. 274 604
2BH191.-7..2. 288 635
2BH191.-7..3. 299 659
2BH191.-7..4. 309 681
2BH1940-7B.2. 275 606
2BH1940-7B.3. 314 692
2BH1940-7B.4. 324 714
2BH1943-7..2. 330 728
2BH1943-7..3. 339 747
2BH1943-7..4. 349 769
Minimum distances
Minimum distance to fan guard (for sucking in
cooling air):
Type [mm] [inches]
2BH1 1.. - 2BH1 4 34 1.34
2BH1 5.. - 2BH1 9 53 2.09
2BH923… 52 2.05
Minimum distance to face of vacuum
pump/compressor cover:
Type [mm] [inches]
2BH1 1.. - 2BH1 5 20 0.79
2BH1 6.. 30 1.18
2BH1 8.. - 2BH1 9 40 1.57
2BH923.. 52 2.05
Noise level
Measuring-surface sound-pressure level as per
EN ISO 3744, measured at a distance of 1 m
[3.28 ft] at an operating point of approximately
2/3 of the permissible total pressure difference
with the lines connected without a vacuum or
pressure relief valve, tolerance 3 dB (A).
Single-impeller design
Type 1-m measuring-surface
sound pressure level
L [dB (A)]
50 Hz
approx.
60 Hz
approx.
2BH1100-7..0. 52 55
2BH1200-7..0. 57 61
2BH1300-7..0. 53 56
2BH1300-7..1. 53 56
2BH1300-7..2. 53 56
2BH1330-7..0. 53 56
2BH1330-7..1. 53 56
2BH1330-7..2. 53 56
2BH1400-7..0. 63 64
2BH1400-7..1. 63 64
2BH1400-7..2. 63 64
2BH1430-7..0. 63 64
2BH1430-7..1. 63 64
2BH1430-7..2. 63 64
2BH1500-7..0. 64 70
2BH1500-7..1. 64 70
2BH1500-7..2. 64 70
2BH1500-7..3. 64 70
2BH1530-7..0. 64 70
2BH1530-7..1. 64 70
2BH1530-7..2. 64 70
2BH1530-7..3. 64 70
2BH1600-7..0. 69 72
2BH1600-7..1. 69 72
2BH1600-7..2. 69 72
2BH1600-7..3. 69 72
2BH1600-7..6. 69 72
2BH1600-7..7. 69 72
2BH1630-7..0. 69 72