Owner manual

© Gardner Denver Deutschland GmbH 27 / 52 610.44520.40.000
Installation
Realisation
G
H
BA
CD
X1
X2
E
F
2ne2bhxn398
Fig. 14: Electrical connections 2FC4302-1NE00 … 2FC4752-1NE00

Mains cable L1, L2, L3, PE

PE connection mains cable

Shielded control cable
Shield connection for the control cable: g:
1 Prepare cable..
ne2bhxn045
2 Insert cable tie..

ne2bhxn046
3 Insert cable and tighten cable tie:
– The shielding must have large−surface
contact to the shield sheet.
– The shielding must be connected
tightly to the shield sheet.
ne2bhxn047

Potential−free terminals

PE connection motor

Support for control terminal module

Control terminal module
X1 Terminal strip for mains connection and relay
output connection
X2 Terminal strip for motor connection
PES HF shield termination by large−surface
connection to PE