USER MANUAL NAME: GPS MOTORCYCLE TRACKER GPS + GSM + SMS / GPRS MODEL: GT100 PLEASE READ THE INSTRUCTIONS BEFORE USING THE UNIT. SAVE IT FOR USE IN THE FUTURE. www.elmic.pl, elmic@elmic.pl Importer: Przedsiębiorstwo Handlowo Usługowe FENIKS Cyprian Pawlaczyk ul.
Safety Warning & Attentions ............................................................................................................................. 3 1. Attention ............................................................................................................................................ 3 2. Attention for operation of this product ..................................................................................................... 3 3. Operation and maintenance ........................
Introduction Thank you for choosing this GPS Motorcycle Tracker. Please read this Manual carefully to fully understand its usage, perfect functions and simple operation. This product not only provides tracking function but also provides cutting petrol or electricity of your car to meet your requirements of monitoring comprehensively car security. The Company reserves the right to modify this Manual from time to time without prior notice.
2. Appearance: 3. Usage: • • • for motorcycles for scooters for other vehicles 4. Performance parameters: Serial 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Strona 4 z 11 Specifications Dimension Weight Backup Battery Operation Temperature Humidity Standby Time GSM Frequencies GPRS GPS Channel GPS Sensitivity Acquisition Sensitivity Position Accuracy Technical parameters 87(L) x 59(W) x 19(H) mm 96g 800mAh / 3.
. LED Indicators Status: GPS LED Indicator – Blue Status Implication Quick Flashing Searching GPS signal Slow Flashing GPS fix OFF No GPS fix or initializing Status Implication Quick flashing (interval 0.1s) GSM initializing Slow flashing (flash 0.1s every 2s) Connected to GSM Network OFF No GSM Signal or no SIM Card installed GSM LED Indicator – Green Power Status – Red Status Implication Flashing (interval 0.1s) Low battery Slow flashing (interval 0.
3. Armed When red/green/blue 3 LED lights are flashing twice in cycle, it means the terminal is armed. 4. Wiring configuration Line No. 1 2 3 4 5 6 7 Specification V+ VACC Relay TX RX GND Color Red Black Orange Yellow Green Blue Purple Instruction Positive pole Negative pole ACC on Relay controlled wire Send data / for backup Receive data / for backup Ground wire 5. Device wiring diagram 1. Use multimeter to find out the negative pole of the battery. 2. Use multimeter to find out the ACC wire.
6. Power Power ON The terminal will be automatically on when you insert the SIM card into the SIM card slot. The battery will connect the internal wires together in the terminal and the external power supply will start providing power to the device and also charging the battery. After the power is on, it will start searching the GSM and GPS signal. During this period, the green indicator (GSM indicator) will be flashing while the blue indicator (GPS indicator) will be flashing quickly.
5. Set the center number If you want to cut off/restore oil by SMS command, you have to set a center number firstly. Only the center number can send the cut off/restore oil command to the device. You can set your own mobile number as center number. The command for setting center number is: CENTER,A,mobile number# For example: CENTER,A,15942703401# If set successfully, there is an “OK” reply message. NOTE：Only the SOS number can be used to set center number successfully. 6.
11. Reboot device When there is something wrong with the link of GPRS, e.g., The parameter setting of the device is correct, but you can't track the car on the platform. At this moment you can send a command to the device to reboot the device. The format is: RESET# After receiving this command, the device will reboot after 1mins. Operation of device 1. Check location 1. Via SMS 1.1 SMS “WHERE#”, to the SIM number of device. The device will send a location message automatically. You can get the coordinates.
6. Oil cut-off 1. Via platform Send oil cut-off command on platform. To make sure the security of vehicle, tracker can only indicate to cut off oil when GPS is in valid position status, and the speed is less than 20KM/H or in static. Platform account password is needed when sending oil cut off command. 2. Via SMS Firstly, you should set a center number. Only center number can send the command to the device to cut off and restore oil.
Trouble shooting If you are having trouble with your device, try these troubleshooting procedures before contacting a service professional. Problems Bad reception The terminal cannot be turned on Fail to connect platform Fail to connect network Fail to charge Causes Near the tall building or in the basement Solutions Change to a place with good signal No battery power Change a new battery The fuse blows ACC ignition disconnected Wrong installation of SIM card Filth on the SIM card iron surface.
