Datasheet

Elmaset www.elma.com C | 3_8
C
3: Handles
Top Handle with ESD Pin
Description Part-No.
Black 81-260
Black offset 81-160
Optional screws for fixing front panels: M2.5,: 61-295
3.4.3 Classic IEEE Standard and Hot-Swap Injector/Ejector Handle
• Without latching (standard)
• Scope of delivery:
• Handle black, without button (plastic, UL94 V-0)
• Card holder (nickel plated)
• Reset spring (stainless steel)
• Assembly material (screws M2.5 for fixing of card holder/printed board)
• Offset version:
• Offset by 2.54 mm (1/2 HP) to the right
• Thus giving more space on the solder side of the PCB
Bottom Handle with ESD Pin
Description Part-No.
Black 81-261
Black offset 81-161
Optional screws for fixing front panels: M2.5,: 61-295
Top Handle with ESD Pin
Description Part-No.
Black 81-255
Black offset 81-155
Optional screws for fixing front panels: M2.5, : 61-295
• With latching (hot-swap)
• Scope of delivery:
• Handle black, button light grey (plastic, UL94 V-0)
• Card holder (zinc die-cast, galvanized)
• Assembly material (screws M2.5 for fixing of card holder/printed board)
• Offset version:
• Offset by 2.54 mm (1/2 HP) to the right
• Thus giving more space on the solder side of the PCB
Bottom Handle with ESD Pin
Description Part-No.
Black 81-256
Black offset 81-156
Optional screws for fixing front panels: M2.5, : 61-295
Microswitch for Injector/Ejector Handle
• Technical data and function see 3.4.7
Description Part-No.
10 pcs.
Microswitch with pre-assembled wire cable length
(25 mm)
81-088-1
Frontpanel
Print
2,5
~35
19,8
13,25
23,4