Datasheet

www.elma.com Elmaset C | 3_7
C
3: Handles
Top Handle with ESD Pin
Description Part-No.
Black 81-095
Black offset 81-184
Optional screws for fixing front panels: M2.5,: 61-295
3.4.2 Ergonomic IEEE Hot-Swap Injector/Ejector Handle
• With latching (hot-swap)
• Scope of delivery:
• Handle black, button red (plastic, UL94 V-0)
• Card holder (nickel plated
• Reset spring (stainless steel)
• Assembly material (screws M2.5 for fixing of card holder/printed board)
• Grey handles available on request
• Offset version:
• Offset by 2.54 mm (1/2 HP) to the right
• Thus giving more space on the solder side of the PCB
Top Handle without ESD pin
Description Part-No.
Black 81-095-01
Optional screws for fixing front panels: M2.5,: 61-295
Bottom Handle with ESD Pin
Description Part-No.
Black 81-096
Black offset 81-185
Optional screws for fixing front panels: M2.5,: 61-295
Bottom Handle without ESD Pin
Description Part-No.
Black 81-096-01
Optional screws for fixing front panels: M2.5,: 61-295
Microswitch for Injector/Ejector Handle
• Technical data and function see 3.4.7
Description Part-No.
10 pcs.
Microswitch with pre-assembled wire cable length (25 mm) 81-088-1
Label 18.5 x 10 mm
1 sheet A4 with 280 labels 81-030
Frontpanel
Print
2,5
~36
19,8
22,8
13,25