Datasheet

ManualsBrandsElma Manuals19" Subracks & PartsErgonomic Handle Black

Elmaset

www.elma.com C | 3_6

3: Handles

Simplify Your Operations

Straightforward and shorter, error free assembly

Injector/Ejector Handle Top with ESD Pin

Description Part-No.

Black 81-075

3.4 Injector/Ejector Handles acc. to IEEE

3.4.1 Ergonomic IEEE Standard Injector/Ejector Handle

• Without latching (standard)

• Scope of delivery:

• Handle black (plastic, UL94 V-0)

• Card holder (nickel plated)

• Reset spring (stainless steel)

•

Assembly material (screws M2.5 for fixing of card holder/printed board/front panel)

• Grey handles available on request

Injector/Ejector Handle Top without ESD Pin

Description Part-No.

Black 81-075-01

Injector/Ejector Handle Bottom with ESD Pin

Description Part-No.

Black 81-076

Injector/Ejector Handle Bottom without ESD Pin

Description Part-No.

Black 81-076-01

Label 18.5 x 10 mm

1 sheet A4 with 280 labels 81-030

Frontpanel

2,5

~36

19,8

22,8

13,25

Label position

Ergonomic

Classic

Telecom long

Ergonomic

Hot Swap

Telecom

Microswitch

Summary of content (9 pages)

PAGE 1
3: H a nd le s Classic Telecom long Ergonomic Ergonomic Hot Swap Telecom 3.4 Injector/Ejector Handles acc. to IEEE Print Without latching (standard) • Scope of delivery: • Handle black (plastic, UL94 V-0) • Card holder (nickel plated) • Reset spring (stainless steel) • Assembly material (screws M2.5 for fixing of card holder/printed board/front panel) Frontpanel 2,5 22,8 • ~36 13,25 3.4.
PAGE 2
3 : H and les 3.4.2 Ergonomic IEEE Hot-Swap Injector/Ejector Handle • With latching (hot-swap) • Scope of delivery: • Handle black, button red (plastic, UL94 V-0) • Card holder (nickel plated • Reset spring (stainless steel) • Assembly material (screws M2.5 for fixing of card holder/printed board) • • Grey handles available on request Offset version: • Offset by 2.
PAGE 3
: H a nd le s 3.4.3 Classic IEEE Standard and Hot-Swap Injector/Ejector Handle • Scope of delivery: • Handle black, without button (plastic, UL94 V-0) • Card holder (nickel plated) • Reset spring (stainless steel) • Assembly material (screws M2.5 for fixing of card holder/printed board) • Offset version: • Offset by 2.
PAGE 4
3 : H and les 3.4.4 Telecom Hot-Swap Injector/Ejector Handle Scope of delivery: • Handle black, button red (plastic, UL94 HB) • Card holder (zinc die-cast, galvanized) • Assembly material (screws M2.5 for fixing of card holder/printed board) • • Grey handles available on request Offset version: • Offset by 2.
PAGE 5
3: H a nd le s 3.4.5 Telecom Long Hot-Swap Injector/Ejector Handle 13,95 Grey handles available on request Offset version: • Offset by 2.54 mm (1/2 HP) to the right • Thus giving more space on the solder side of the PCB 2,5 52,4 • • Print 39,38 Scope of delivery: • Handle black, button red (plastic, UL94 HB) • Card holder (zinc die-cast, galvanized) • Assembly material (screws M2.
PAGE 6
3 : H and les L1 L3 L2 3.4.6 Cutouts and Function M 2,5 4 HP -0,3 7,47 + (n-3) x 5,08 9/10/12/14 HP -0,3 C 6,2 5/6/7/8 HP -0,3 Injector/Ejector Handle Without Locking Feature (Function) C | 3_11 Injector/Ejector Handle With Locking Feature (Function) Elmaset www.elma.
PAGE 7
3: H a nd le s Injector/Ejector Offset Handle With Locking Feature (Function) Injection As soon as the handle reaches its end position (plug-in unit fully seated) it is automatically locked (microswitch actuates). Ejection 6.61 1. Unlock to release handle (microswitch actuates) 2. Eject C EMC spring Dimensions Height L1 mm L1 inch L2 mm L2 inch L3 mm L3 inch L4 mm L4 inch L5 mm L5 inch 3U 128.55 5.06 102.05 4.01 122.50 4.82 88.90 3.50 81.30 3.20 6U 261.90 10.31 235.40 9.
PAGE 8
3 : H and les Hot-Swap Safely at the Touch of a Button Modern backplanes are equipped with high pin density connectors. In order to manage the occurring high connecting forces, up to 500 N (100lbs.) for a 6U plug-in unit, a new insertion/extraction handle was designed and standardized in IEEE 1101.10. The standards for CompactPCI Hot Swap and VME64x show new features added to the IEEE handle. To meet these different demands, Elma has developed two handles. To confirm with IEEE 1101.
PAGE 9
3: H a nd le s 27 3.4.8 Card Holder and Coding Pins acc. to IEEE Scope of delivery: • End piece card holder (zinc die-cast, nickel plated) • Assembly material (screws M2.5 for fixing of front panel/card holder/printed board) 22,4 • 19,8 3.4.8.1 Card Holder/End Piece with ESD Pin Description Part-No. Top 81-018 Bottom 81-019 C 3.4.8.2 Card Holder/End Piece without ESD Pin Description Part-No. Top 81-018-01 Bottom 81-019-01 3.4.8.3 Coding Pins • • • www.elma.com Acc.