Datasheet

www.elma.com Elmaset E | 1_3
E
1: Card Guides
1.1.1 Card Guides 1-Slot
• Scope of delivery:
• Card guide black plastic UL94 V-0
• ESD Clip see below (not usable for card depth 80mm)
Card Thickness Card Depth Part-No.
mm inch mm inch
1.6 0.06
80 3.15 61-019
160 6.30 61-044
220 8.66 61-039
280 11.02 61-017
2.0 0.08
160 6.30 61-087
220 8.66 61-039
280 11.02 61-169
1.1 Card Guides Standard acc. to IEC
• For positive location of circuit boards and plug-in units conforming to the
dimensions of card depths 80 mm, 160 mm, 220 mm
and 280 mm
• The card guides are non-flammable, made from a high quality plastic mate-
rial reinforced with fibreglass (UL94 V-0)
• Including ESD provisions
ESD Clips
• Connecting PCB with case
Description Part-No.
ESD clip front bottom/rear top 61-419-01
ESD clip front top/rear bottom 61-419-02
210
150
81,3
(For card depth 160 mm)
(For rear card depth 80 mm)
(For card depth 220 mm)
210
150
81,3
(For card depth 160 mm)
(For rear card depth 80 mm)
(For card depth 220 mm)
210
150
81,3
(For card depth 160 mm)
(For rear card depth 80 mm)
(For card depth 220 mm)
1.1.1 Card Guides 1-Slot