: Car d Gu id e s 1.1 Card Guides Standard acc. to IEC E | 1_3 1.1.1 Card Guides 1-Slot E | 1_3 1.1.2 Card Guides 7-Slot in 4 HP Steps E | 1_4 1.1.3 Card Guides 1-Slot, 3 Parts E | 1_4 1.1.4 Card Guide Board-Retention Bar E | 1_4 1.2 Rugged Screw mount Card Guides acc. to IEC E | 1_5 E | 1_6 1.2.2 Optional Mounting E | 1_6 1.2.3 ESD Clips E | 1_6 E 1.2.1 Standard Mounting 1.3 Card Guides Standard acc. to IEEE E | 1_1 E | 1_7 1.3.1 Card Guides 1-Slot E | 1_7 1.3.
1: Ca r d Guid e s 1.4 Rugged Screw-mount Card Guides acc. to IEEE E | 1_10 1.4.1 Standard Mounting E | 1_10 1.4.2 Optional Mounting E | 1_11 1.4.3 ESD Clips E | 1_11 1.4.4 ESD Spring E | 1_11 1.4.5 Coding Pins E | 1_11 1.5 uTCA Components E | 1_12 1.5.1 uTCA Extrusion E | 1_12 1.5.2 uTCA Card Guide E | 1_13 1.5.3 uTCA ESD Clip E | 1_13 1.5.4 Tapped Strips M3 E | 1_13 1.5.5 Countersunk Screw M3 x 6 mm E | 1_14 E www.elma.
1 : Car d Gu id e s 1.1 Card Guides Standard acc.
1: Ca r d Guid e s 1.1.2 Card Guides 7-Slot in 4 HP Steps 1.1.2 Card Guides 7-Slot in 4 HP Steps • • • • • For reduced assembly time of multiple slot applications For use with single, double and triple eurocards with a depth of 160 mm For card thickness: 1.6 mm / 0.06" Black plastic, UL94 V-0 ESD Clip not usable Card Thickness mm 1.6 Card Depth mm 160 inch 0.06 Part-No. inch 6.30 61-076 1.1.3 Card Guides 1-Slot, 3 Parts 1.1.
1 : Car d Gu id e s 1.2 Rugged Screw mount Card Guides acc. to IEC • • • • • • • • Simple assembly comparable to anchoring Very high retention force Shock and vibration proof For positive location of circuit boards and plug-in units For card thickness 1.6 mm / 0.06” and 2.0 mm/0.08” with anti-vibration feature The card guides are nonflammable, made from a high-quality plastic material reinforced with fibreglass (UL94 V-0) With ESD provision Stainless steel PT-screw, Torque: 0,36 Nm 1.
1: Ca r d Guid e s 1.2.1 Standard Mounting 1.2.1 Standard Mounting • With Stainless Steel Security Screw (from Top) Description Part-No. Cross recessed pan head screw, Inox Note: For highest security 2 screws/card guide are necessary. 5588-08 PT screw PT screw 1. Insert Card Guide 2. Shift Card Guide 3. Protection by Screwing 1.2.2 Optional Mounting 1.2.2 Optional Mounting • With M2 screw, washer and nut (from Bottom) Description Part-No.
1 : Car d Gu id e s 1.3 Card Guides Standard acc. to IEEE • For positive location of PCBs and plug-in units conforming to the dimensions of card depths 80 mm, 160 mm, 220 mm, 280 mm and 340 mm • The card guides are nonflammable, made from a high quality plastic material reinforced with fibreglass (UL94 V-0) • With ESD provisions • With keying and alignment pin possibilities 150 (For card depth 160 mm) 33 70 (For rear card depth 80 mm) E 1.3.1 Card Guides 1-Slot • Card thickness 1.6 mm / 0.06" and 2.
1: Ca r d Guid e s 1.3.2 Card Guides 1-Slot, incl. mounted ESD-Components • Bottom: 1 ESD clip and 1 ESD spring • Top: 1 ESD spring • Black plastic UL94 V-0 1.3.2 Card Guides 1-Slot, incl. mounted ESD-Components Card Depth mm 80 inch 3.15 Card Depth mm 160 160 inch 6.30 6.30 Description Part-No. 1 Pair 1 pair top/bottom 61-949-02 Description Part-No. 1 piece bottom 1 piece top 61-950-02 61-950-04 Clip Spring Spring Clip Spring Clip Spring 1.3.3.
1 : Car d Gu id e s 1.3.4 ESD Clips • Connecting printed board with case 1.3.4 ESD Clips Description Part-No. ESD clip front bottom/rear top 61-419-01 ESD clip front top/rear bottom 61-419-02 1.3.5 ESD Spring • Connecting ESD pin with case • Note: Notch inward-looking 1.3.5 ESD Spring Part-No. ESD spring 61-420 E Description 1.3.6 Coding Pins • Acc. to IEC 60297-3-103 • Plastic, UL94 V-0 • Can be rotated in 4 positions 1.3.6 Coding Pins E | 1_9 Colour Part-No.
1: Ca r d Guid e s 1.4 Rugged Screw-mount Card Guides acc. to IEEE • • • • • • Simple assembly comparable to anchoring Very high retention force Shock and vibration proof For positive location of circuit boards and plug-in units For card thickness 1.6 mm / 0.06” and 2.0 mm/0.
1 : Car d Gu id e s 1.4.2 Optional Mounting • With M2 screw, washer and nut (from Bottom) 1.4.2 Optional Mounting Description Part-No. 1 set (1 each) Cross recessed pan head screw M2x12, Inox Hexagonal nut M2 Inox Part-No. 5304-13 63-484 Serrated lock washer 5620-12 5708-12 Note: For highest security 2 sets/card guide, 4 sets/pair are necessary. nut M2 screw washer 1.4.3 ESD Clips • Connecting printed board with case 1.4.3 ESD Clips Description Part-No.
1: Ca r d Guid e s The MicroTCA name and Logo are trademarks of the PCI Industrial Computers Manufacturers Group uTCA • • • The PICMG® Micro Telecommunications Computing Architecture (MicroTCA™) specification defines the requirements for a system that uses PICMG Advanced Mezzanine Cards (AdvancedMCs) directly on a Backplane. This specification, MicroTCA.0, defines the general mechanical, electrical, thermal, and management properties of a MicroTCA Shelf necessary to support AMC.0 compliant Modules.
1 : Car d Gu id e s 1.5.2 uTCA Card Guide • • • • Fits on extrusion 66-242-X Top and bottom use of card guide Plastic, grey, UL94 V-0 ESD clip can be assembled at front and rear 1.5.2 uTCA Card Guide Description Part-No. uTCA Card guide 61-193-00 1.5.3 uTCA ESD Clip • Fits on uTCA card guide 61-193-00 • Stainless steel 1.5.3 uTCA ESD Clip Part-No. uTCA ESD clip 61-194 E Description 1.5.4 Tapped Strips M3 • 2 x 6 mm M3 • Fit into uTCA extrusion 66-242-XX • Steel, glavanised, passivated 1.5.
1: Ca r d Guid e s 1.5.5 Countersunk Screw M3 x 6 mm • Cross recessed, Philips #1 • Steel, galvanised, passivated 1.5.5 Countersunk Screw M3 x 6 mm Description Part-No. Countersunk screw M3 x 6 mm 5332-06 E www.elma.
