Compact case type 33 Sturdy, flexible and portable Description: • Sturdy • Handy • Easy service access • Tilt-up feet • No visible screws • Optional carrying handle Suitable for: • Mounting grooves • Mounting panels • Single eurocard • Double eurocard ➟ direct arrangement with case sizes 2, 3 and 5 1 mm = 0.0394 inch, 1 inch = 25.
Compact case type 33 Types and sizes Type 33 The type 33 series comes in 3 different widths and overall 6 different sizes to meet many different requirements. The basic case consists of two aluminum extrusions and guarantees optimal and professional packaging of your boards or components. (Internal dimensions/mm) Case 5 230.5⫻41 Case 0 Case 2 129.5⫻55 230.5⫻55 Case 4 Case 1 129.5⫻71,5 Case 3 183.5⫻111 230.
Compact case type 33 Type 33 • • • • Simple and strong design (alu case) High heat dissipation Mounting options Modern look Color Bezel: Top and bottom: Front panels: stone-grey (RAL 7030) pebble-grey (RAL 7032) both sides anodized Type 33 Including front panels Excluding front panels Case Depth 180 mm Depth 240 mm Depth 300 mm 7.08⬙ 9.44⬙ 11.81⬙ Case Depth 180 mm Depth 240 mm Depth 300 mm 7.08⬙ 9.44⬙ 11.81⬙ 0 (129.5x55) 33-018-35 – 0 (129.5x55) 33-02118-00 33-024-35 33-02124-00 – 1 (129.
Compact case type 33 Type 33 EMC • • • • Basic construction as type 33 All internal and contact surfaces are conductive 1 EMC shielding set High attenuation characteristics (~30⫼60 dB) Color Bezel: Top and bottom: Front panels: light grey (RAL 7035) light grey (RAL 7035) external = anodized, internal = alodine treated Type 33 EMC Including front panels Excluding front panels Case Depth 180 mm Depth 240 mm Depth 300 mm 7.08⬙ 9.44⬙ 11.81⬙ Case Depth 180 mm Depth 240 mm Depth 300 mm 7.08⬙ 9.44⬙ 11.
Compact case type 33 Type 33 IP54 • • • • Basic construction as type 33 Splash-resistant and dust-protected Front panel seal Case seal Color Bezel: Top and bottom: Front panels: stone-grey (RAL 7030) pebble-grey (RAL 7032) both sides anodized Type 33 IP54 Including front panels Case Replacement seals Depth 180 mm Depth 240 mm Depth 300 mm 7.08⬙ 9.44⬙ 11.81⬙ Case Packing unit Part No. 1 (129.5x71.5) 5 pcs. 33-531 1 (129.5x71.5) 33P118-35 33P124-35 – 2 (230.5x55) 5 pcs. 33-532 2 (230.
Compact case type 33 Front panels Without air perforation Aluminum; 2.5 mm Case Front and rear side anodized 0 (non-conductive) 1 2 3 Surfaces Part No. 33-400-50 33-401-50 Both sides anodized (non-conductive) 33-402-50 33-403-50 4 33-404-50 5 33-405-50 With air perforation Case Surfaces 0 2 3 Part No. 33-400-51 Both sides anodized (non-conductive) 4 33-402-51 33-403-51 33-404-51 Without air perforation EMC front panels Aluminum; 2.
Compact case type 33 Mounting bracket Case Packing unit Part No. 0, 1, 2, 3, 4 2 pcs. incl. fixing material 33-650 Eurocard mounting set Case Card mounting Part No. 0, 2 horizontal (7 x 5.08 mm/0.20⬙) 33-204 1, 3, 4 horizontal (10 x 5.08 mm/0.20⬙) 33-205 4 vertical (31 x 5.08 mm/0.20⬙) 33-210 Card depth 160 mm (6.29 ⬙); connector conforming to DIN 41612 Card guides Depth Packing unit Part No. 160 mm 6.29 ⬙ 5 pairs 63-120 160 mm 6.
Compact case type 33 Card stop set Case Packing unit Part No. 0, 1, 2, 3, 4, 5 4 pcs. 33-618 Sliding blocks M5 (1) Case Mounting piece Packing unit Part No. 0, 1, 2, 3, 4 Handle groove (1) 1 piece 33-665 0, 1, 2, 3, 4 Foot groove (2) 4 pieces 33-666 mm➛ 28 ➛ mm 20 ➛ ➛ (2) M4 Earthing set Case Specification Part No. 0, 1, 2, 3, 4, 5 EN VDE/SEV 33-619 1 mm = 0.0394 inch, 1 inch = 25.
Compact case type 33 Cross sections of extrusions Case type 0 and 2 Case type 1 Case type 3 Case type 4 Case type 5 Line drawings Front view Type Internal dimensions A B C D E F F G Side view H J K Bottom air perforation M⫾0,5 S Intern. Board width width L if L if t = 180 t = 240 t = 300 t = 240 t = 300 0 129.5 155.5 55 69 130 134 133 51.7 109 7.5 151 64 – – – ✔ ✔ 1 129.5 155.5 71.5 85.5 130 134 133 68.4 109 7.5 151 80.5 – – – ✔ ✔ – 2 230.
