Datasheet

www.elma.com Elmaset C | 1_2
C
1: Front Panels for Sub Racks and Enclosures
1.1 Flat Front Panels for Sub Racks and Enclosures, Solid
Width
B Height Part-No.
mm inch
1 U
39.8mm
ca. 1 U*
42.15mm
2 U
84.2mm
3 U
128.7mm
4 U
173.1mm
6 U
262.0mm
7 U
306.5mm
9 U
395.4mm
2 HP
(1)
10.0 0.39 — — — 21N302 — 21N602 — —
3 HP 15.2 0.59 — — — 21N303 21N403 21N603 — —
4 HP 20.1 0.79 — — — 21N304 21N404 21N604 — 21N904
5 HP 25.2 0.99 — — — 21N305 21N405 21N605 — —
6 HP 30.3 1.19 — — — 21N306 21N406 21N606 — —
7 HP 35.3 1.38 — — — 21N307 21N407 21N607 — —
8 HP 40.4 1.59 — — — 21N308 21N408 21N608 — —
10 HP 50.6 1.99 — — — 21N310 21N410 21N610 — —
11 HP 55.7 2.19 — — — 21N311 — — — —
12 HP 60.7 2.38 — — — 21N312 21N412 21N612 — —
14 HP 70.9 2.79 — — — 21N314 21N414 21N614 — —
16 HP 81.1 3.19 — — — 21N316 21N416 21N616 — —
20 HP 101.4 3.59 — — — 21N320 21N420 21N620 — —
21 HP 106.5 4.19 — — — 21N321 — 21N621 — —
28 HP 142.0 5.59 — — — 21N328 — 21N628 — —
32 HP 162.3 6.38 — — — 21N332 21N432 — — —
42 HP 213.1 8.38 — — 21N242 21N342 21N442 21N642 — —
52 HP 263.9 10.38 — — — 21N352 21N452 21N652 — —
63 HP 319.8 12.59 — — 21N263 21N363 21N463 21N663 — —
81 HP 411.3 16.19 — — 21N281 21N381 21N481 21N681 — —
84 HP 426.5 16.79 21N184 21N084* 21N284 21N384 21N484 21N684 21N784 21N984
* Coverplates for 1 U fan opening
1.1.1 Front Panel Screws
• Set of 10 screws, with screw retainer
Description Part-No. 10 pcs.
Torx screws M2.5 x 11.3, size T8 with plastic screw retainer 63K159
Rounded head screws recessed M2.5 x 11.3 with plastic screw retainer 63-159
m x 44.45-4.65
m x 44.45-10.85
7.52
7.52
9-84 HP
B
m x 44.45-4.65
m x 44.45-10.85
7.52
n ≤ 8 HP (>2 HP)
1.1 Flat Front Panels
• For sub racks and enclosures, solid
• Aluminium 2.5 mm, clear anodised (non-conductive)
• Scope of delivery:
• Flat front panel
• Front panel screws, see below
• 2 HP version: screw retainer can not be fitted