8 in.
18 in. EVOLUTION Easy-Push Reel Mower with Adjustable Grass Management System Model Number: E2201-18 Fill in the following information and save: Date of Purchase: _______________________ Retailer: _______________________________ If you need assistance or have questions, don’t return to the store. Call our customer service at 1-800-918-8290 Visit us at www.ellison-tools.
Warranty …………………………………………………............................ 2 Getting Started…………………………………………………….…….…… 3 Safety Information..…………………………….…………………….……… 4 Product Features…….……………………...…………………….….……… 5 Main Operating Parts….……………………………………………..……… 6 Handle Assembly………….….…...………………………..….……..…….. 7 Attaching the Handle……………….…….……………………….………… 8 Attaching the Grass Bag………………....……………………….………… 9 Grass Management System.…….………………………..……..………… 10 One-Touch Height Adjust…...…………………………….….….
Safety Information ! WARNING Safety Information Do not use mower if you are in poor health. Use the mower only for its intended purpose. Do not use mower in areas other than grass. Check mower before each use. Do not operate with missing, worn, or damaged parts. Inspect your lawn for any debris or foreign objects (such as stones, twigs, pieces of wood, and wires) and remove them before mowing. Solid objects that contact the cutting blades could be thrown out uncontrollably.
Easy Push Cutting System Grass Management System 1) Much easier to use 2) Maintains higher blade speeds with less effort 3) Blades stay sharp - no seasonal sharpening required The oversized Grass Bag plus the Grass Deflector (Patents Pending) allow for the greatest control over grass clippings of any reel mower during both collecting and mulching modes.
Main Components Main Components Handle Grip Height Adjustment Knob (1-in to 4-in cut height adjustment) Handle Cover Handle Knobs (2) Left Side Cover Handle Frame Grass Bag Mount Right Grass Deflector Grass Bag Handle Grass Bag Cutting Reel (with 5 helical cutting blades) Rear wheels (2) Stationary Blade Right Side Cover Front wheels (2) 6 Top Cover Middle Brace Grass Bag Mount Left Actual product may vary 6
① There are no tools required for assembly of the handle. ② Note that the Upper Handle (A) is already factory pre-assembled with the Center Handle (B), the Handle Cover (C), and the Handle Bolts (D). ③ Lay out the parts as shown below. Note the Lower Handle parts (E) are symmetric, and there is no right or left version.
Attaching the Handle Attaching the Handle ① Once the handle components are fully assembled, the next step is to attach the handle to the mower. Do not install the Grass Bag yet. ② Note the attachment pegs on the inside facing surfaces of the main mower body. Shown in the inset as (I) ③ While gripping the handle by the Lower Handle tubes shown as position (J) and (K), squeeze these two areas inward and hook the holes in the ends of the tubes onto the attachment pegs from the main mower body (I).
Once the handle is attached to the mower, rotate it fully upward to its storage position. Position the Grass Bag as shown in the figure below. Note the attachment slots on the mower inside of the rear wheels on both ends (L). The attachment rods on the Grass Bag are also on both ends. The right side is shown as (M). ⑤ Insert the Grass Bag attachment rods into the attachment slots on the mower. ⑥ Rotate the Handle downward to its usage position and it is ready to use.
Grass Management System Using the Grass Management System ① The Grass Management System consists of the Grass Deflector (Patents Pending), an oversized Grass Bag, and our One-Touch Height Adjustment from 1 to 4 inches. These provide the greatest control over grass clippings of any reel mower. ② There are 2 modes of usage: Grass Collecting and Mulching. During the dry parts of the season, mulching is recommended to help maintain moisture in your lawn.
① Your mower has a One-Touch Height Adjustment for varying your grass cut height from 1 to 4 inches. ② To adjust the cutting height, face the mower from its right side and hold onto the Lower Handle bar with your left hand. With your right hand, grip the One-Touch Height Adjustment Knob. (See illustration on the right) ③ Pull the Height Adjustment Knob toward you to take it out of its current position and then slide it to your left or right to change its position.
Checking Cutting Blades Checking Cutting Blades Your EVOLUTION Reel Mower has been designed to cut grass without the blades actually touching. This makes it easier to use, maintains higher blades speeds with minimal effort, and the blades do not require seasonal sharpening. There should always be a very small gap between the helical cutting blades and the stationary blade. It is possible for slippage to occur during shipping, handling, or usage.
If the blades are touching: (from test on page 12) If the helical cutting blades are touching the stationary blade, first check for any damage or dents on both the helical cutting blades and the stationary blade. If any dents are found, turn to page 16 for instructions on repairing dents. If there is no visible damage, then begin with step 1 below to loosen the Adjustment Bolts to separate the blades.
Checking Cutting Performance 14 Checking Cutting Performance – Paper Test If the helical cutting blades are not touching the stationary blade, you can now check if the blades cut properly. You will need to check both the left side and the right side of the mower. WARNING: The mower blades are sharp! Wear gloves for this procedure, and keep fingers away from the interface between the helical cutting blades and stationary blade. ① You will need several 1 inch wide strips of standard printer paper about 8.
Use the following tips to ensure the proper function of your EVOLUTION Reel Mower for many years. ① Clear lawn of debris and foreign objects prior to each use. This prevents the primary causes of damage to the cutting blades. ② If you hit something while mowing, always stop to inspect the blades for a jam or damage. If a blade appears damaged, do not continue mowing since forcing the cutting blade to rotate can cause more damage.
Care and Mainenance Care and Mainenance Minimal care is needed to maintain your EVOLUTION mower. However, take these steps to ensure optimal mower performance. Avoid damage to the mower or cutting blades. Keep your mowing area free from any debris or foreign objects such as stones, twigs, pieces of wood, and wires. Solid objects can both damage the cutting blades and be a safety hazard to the user, as they could be thrown uncontrollably.
If the cutting blades start to touch the stationary blade, it will produce a scraping sound or it will not rotate freely at all. In this case, stop immediately and prepare to check for damage to the blades. Before checking for blade damage, place the mower on a firm, level surface. WARNING: The mower blades are sharp! Wear gloves for this procedure, and keep fingers away from the interface between the helical cutting blades and stationary blade.
Troubleshooting Troubleshooting Your EVOLUTION Reel Mower with Grass Management System is designed to operate right out of the box with only the quick tool-less assembly of the Handle needed. If you experience any issues using the mower, please read the information below to help you diagnose your problem and find a solution. Problem: The mower is hard to push. Are you trying to cut too much grass? • Check the height setting for the mower.
WARNING Safety Information Do not use mower if you are in poor health. • Check to see if anything is causing a jam for the cutting reel, in particular look on the cutting blades and on the sides of the cutting reel. If something is found, clean with a brush. Do not stick your hand inside the cutting blades! Do not use mower in areas other than grass.
159 N. Racine Ave. 3E Chicago, IL 60607 (800) 918-8290 www.ellison-tools.
