Wingback Accent Chair Sillón de acento Assembly Instructions Instrucciones de ensamblaje MODEL / MODELO CR-46911 THIS CHAIR CAN SUPPORT UP TO: ESTE SILLÓN PUEDE SOPORTAR HASTA: 113 kg / 250 lb
Chair Assembly Instructions Carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid scratching the components, assemble the chair on a protected surface. We are here to help if you have any questions, comments, or are in need of warranty replacement parts. Visit our website at : www.truecustomersupport.
Parts/Partes A Chair Silla Quantity/cantidad: 1 B Front Legs Patas delanteras Quantity/cantidad: 2 D 50mm Screws with Flat Washers Tornillos de 50 mm con arandelas planas Quantity/cantidad: 8 C Rear Legs Patas traseras Quantity/cantidad: 2 E Allen Key Llave allen Quantity/cantidad: 1 3
Step 1 Remove all parts from the carton and separate them into part number groups as indicated in the parts list. Place the Chair (A) upside down. Open the zipper on the bottom of the Chair (A) and take out the Legs (B & C) out of the seat box. Paso 1 Retire todas las partes de la caja de cartón y agrúpelas conforme al número de la parte, como se indica en la lista de partes. Coloque la silla (A) al revés. Abra el cierre en la parte inferior la silla (A) y saque las patas (B y C) de la caja.
C C D E D A A D B B Step 2 Insert Front Legs (B) and Rear Legs (C) into the bottom of the Chair (A) as shown and connect with 50mm Screws with Flat Washers (D). Do not tighten screws fully until you have completed assembly. Place chair upright on level floor. Make any necessary adjustments to frame to ensure chair sits flat on floor without rocking, then tighten all screws securely with Allen Key (E). Close the zipper.
Periodically (every 90 days) make sure that the screws are still fully tightened. Periódicamente (cada 90 días), cerciórese de que los tornillos estén totalmente ajustados.
Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned seating products.
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así demostrado por el recibo original. Esta garantía no le aplica a muebles usados comprados “como tales”.
