Vallauris Outdoor Sectional Assembly Instructions { iNClUDES iMPOrTANT SAFETy iNFOrMATiON. PlEASE rEAD AND KEEP FOr FUTUrE rEFErENCE.
Should you prefer to speak with a customer service representative, you may call toll free : 1-855-372-2315.
Limited Warranty The exceptions or exclusions to this warranty are: • Upholstery material and foam cushion material is warranted against defects in material and workmanship for Millwork Holdings seating products are warranted against a period of one year, beginning on the date of purchase as defects in material and workmanship while owned by the shown on the original sales receipt. “Original Purchaser”.
Guidelines Thank you for selecting an Elle Decor piece! Our primary objective is to provide fast, friendly customer service to all of our customers. We are here to help if you have any questions, comments, or are in need of warranty replacement parts. Please call us toll free at: 1-855-372-2315 (Monday - Friday 6:00am - 5:00pm PST) Or visit our website: www.truecustomersupport.com www.trueinnovations.
WARNING: Do not let children play in or around the unit due to the possible risk of finger entrapment. Pre-Assembly Preparation: Cleaning & Maintenance: Please read through this instruction before beginning assembly of this item. • Wash frame parts with mild soap and water, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid or other solvents on the wicker or metal parts. • We recommend the use of furniture covers to protect the set when not in use.
Parts Inventory 06
07
STEP 1 Lift to insert Left Side Panel’s (1) attached hardware into Base Panel’s (2) attached hardware. Push downwards until fully locked in place.
STEP 2 1. Lift to insert Back Panel (3) and attach hardware into Left Side Panel’s (1) hardware and push down until fully connected. 2. Insert M6 x 40mm bolt (A) with Washer (B) with Allen Key (E) through Base Panel (2) connecting to Back Panel. Fully tighten.
STEP 3 10 Attach plate (D) with M6 x 15mm bolt (C) and Washer (B) and fully tighten using Allen Key (E).
STEP 4 insert cushion (L) into Cushion Cover(M). repeat for each cushion.
STEP 5 1. Take out seat cushion (P) from Base panel (5). 2. Attach Feet (8) to Base panel (5) by using M6 x 35mm bolt (F) and Washer (B). Tighten using Allen Key (E). 3. Attach Part (G) to Base panel (5) by using M6 x 40mm bolt (A) and Washer (B). Tighten using Allen Key (E). 4. Attach Part (H) to Base panel (5) by using M6 x 35mm bolt (F) and Washer (B). Tighten using Allen Key (E).
STEP 6 Attach Back Panel (4) to Base panel (5) by using M6 x 40mm bolt (A) and Washer (B). Tighten using Allen Key (E).
STEP 7 Attach Seat panel (6) by inserting into holes located on Base panel (5) and tighten the left hole by using M6 x 35mm bolt (F) and Washer (B) with Allen Key (E) as shown in diagram.
STEP 8 To RAISE AND LOCK LID Raise the Seat panel (6) until the ring on the Hardware is able to fit over the Hardware Rod. Remove to lock.
STEP 9 16 Lift to insert Right side panel’s (7) attached hardware into Base panel (5) and Back panel’s (4) attached hardware. Push downwards until fully locked in place.
STEP 10 Attach plate (D) with M6x 15mm bolt (C) with Washer (B) and fully tighten using Allen Key (E).
STEP 11 Turn the sofa on its back and attach the sofa and lounger in front by M6 x 60mm Bolt (I) and Washer (B) and Nut (J), then fully tighten by Allen Key (E) and Wrench (K).
STEP 12 your cushion filler is vacuum packed. Open Back cushion filler pack (Q) and insert to Back cushion cover (R).
O All fi nished! 20
To REVERSE THE PoSIoN FoR SoFA AND LoUNGER- oPTIoNAL STEP 1 1. Unscrew the screw and nut of the 3 pieces of hardware on the Sofa seat with Allen Key (E) and Wrench (K). 2. Unscrew the screw on the feet with Allen Key (E).
STEP 2 1. Screw the screw and nut of the 3 pieces of hardware on the opposite side of the Sofa seat with Allen Key (E) and Wrench (K). 2. Screw in the screw on Feet with Allen Key (E). 3. Lift to insert Right side panel’s (7) attached hardware into Sofa’s attached hardware. feet Push downwards until fully locked in place.
STEP 3 1. Unscrew the screw and nut on 3 piece hardware on loungers with Allen Key (E) and Wrench (K). 2. Unscrew in the screw on Feet with Allen Key (E).
STEP 4 1. Screw in the screw and nut on 3 piece hardware by Allen Key (E) and Wrench (K). 2. Lift to insert Left Side Panel (1) attached hardware into Base panel (5) and Back panel’s (4) attached hardware. Push downards until fully locked in place. 3. screw in the screw on feet by Allen Key(E).
STEP 5 Turn the sofa on its back and attach the sofa and lounger in front with M6x 60mm Bolt (I) and Washer (B) and Nut (J). Then fully tighten by Allen Key (E) and Wrench (K).
O All finished! 26
Thank you for your purchase! We hope you love your Elle Decor piece as much as we do.
