Installation Guide

TOUCHSTONE Surface Heater Control System
Installation Instructions
Operating Instructions
Surface Heaters
It is recommended to turn the Surface Heater ON 5-10 minutes prior to
entering the tub. Once the Heater Button is pressed the red LED
indicator will illuminate and start a 30-minute timer. The Heater will
begin to warm the surface of the seat and/or back wall. The
temperature will increase to a comfortable level within a 5-10 minute
period. To turn off the Surface Heater earlier press the Surface Heater
button.
Optional Multi-color Tub Light
The Multi-color Tub Light is activated by pressing
the light icon key on the combination electronic
keypad at any time.
Rainbow Mode:
The first press will put the light in a “Rainbow” mode, rotating through
each of the color variations.
Single Color Mode:
Subsequent press-and-release of the light key will illuminate a single
light color in the following order: White, Blue, Aqua, Green, Yellow,
Red, Magenta
Power off:
To turn off the Light press and hold the light key at any time.
May not be applicable to your specific package
Refer to your package diagrams for more information