Specification

ellasbubbles.com

Ella 2 Piece Single Lever

Fast-Fill Faucet

Description

Solid brass spout chrome finish single lever high flow bathtub

faucet with diverter button Two (2) 3/4” 5’ braided stainless-

steel supply lines Pull out hand shower mixer with 5 settings

and 5’ braided hose in a Chrome or Brushed Nickel finish.

Flow

• Hand shower is limited to 1.9 GPM (7.5L/min)

• Faucet fill rate designed for 18 GPM (68.1L/min)

Cartridge

• 40mm high flow cartridge design

• Nonmetallic/nonferrous and stainless-steel material

Standards

Certified to meet:

• CSA B-125.1, ASME A112.18.1,ICC 117.1

• Certified to ANSI/NSF 61/9

• ADA for lever handle

• IAPMO R&T UPC certified

NOTE: This faucet is designed to be installed through: G.W: 7.75 kg/ 17 lbs., 2-1/2” diameter hole for faucet, 1/3” diameter hole

for mounting rods, 7/8” diagonal hole for hand shower

8 of 9 August 2021

Chrome Finish

Brushed Nickel Finish

Hold and Cold ON/OFF Lever

ON/OFF Push Diverter

for the Hand Shower

Spout

PAGE 1
Ella 2 Piece Single Lever Fast-Fill Faucet Description Solid brass spout chrome finish single lever high flow bathtub faucet with diverter button Two (2) 3/4” 5’ braided stainlesssteel supply lines Pull out hand shower mixer with 5 settings and 5’ braided hose in a Chrome or Brushed Nickel finish. Hold and Cold ON/OFF Lever Brushed Nickel Finish Flow • Hand shower is limited to 1.9 GPM (7.5L/min) • Faucet fill rate designed for 18 GPM (68.
PAGE 2
Replacing A Valve Cartridge Step-by-step Instructions to replace a valve cartridge for Ella 2-piece faucets. Step.2 Use an Allen wrench to remove the handle Screw. Step.1 Remove the Hot/Cold screw hole cover. Step.3 Take out the handle and remove the brass escutcheon Step.4 Use a wrench to unscrew the pressure cap. Step.5 Remove the cartridge and replace it with new piece. ellasbubbles.