Installation Guide

Side panel attachment applied
by pushing the Velcro tas together
on the frame and in side of the side panel.
Side panel has to be cut 3/8" to ensure flush fit against wall and proper side attachment with Velcro.
1. Over lap that needs to be cut.
2. Place tape over side panel
3. Mark a line 3/8" from top to
bottom of side panel.
4. Clamp down a metal straight
edge to insure a straight cut. then
use saw blade to cut the side panel.
5. Attach side panel using Velcro
Side Panel Cutting
Adjustments.
ellasbubbles.com
3/22/23
Page 16 of 24